Hobart meat grinder, 20 Amp 250 V, 3 Phase. Customer states it is in good operating condition.
Red bin and rolling stand pictured are NOT included
Hobart Meat Slicer Model 512, 1/4 Hp, 115V, 5.0 Amp, 1725 RPM. Customer states it is in good operating condition.
NICE TRACTOR! Check out the videos to hear and see it run.
Case IH 7140 Cab Tractor with duals and front wheel assist
Shows 9274 hrs
Diesel powered
MFWD
1,000 rpm PTO
3-pt hitch
Front tires 18.4-26 (2) - check tire condition - showing wear
Back tires 20.8-38 (4) - check tire condition - showing wear
All cab glass appears good
PIN: JJA0020098
SCHEDULE A TIME TO COME TAKE A LOOK! CALL JON AT (641) 420-5417 TO SCHEDULE.
TRACTOR MAY BE REMOVED BY APPOINTMENT ONLY ON EITHER TUESDAY, DEC 3RD OR WEDNESDAY, DEC 4TH AS IT WILL BE USED TO LOAD OTHER EQUIPMENT.
PLEASE REMOVE TRACTOR NO LATER THAN DEC 4TH. $100/DAY STORAGE FEE WILL BE CHARGED BEGINNING DEC 5TH.
720A Champion Road Grader, 8.3L Cummins engine, 7,170 hrs
14 Foot Blade
Some glass damage
REMOVAL BY APPOINTMENT: MUST REMOVE NO LATER THAN MONDAY, DEC 2ND
Compaction Roller for conditioning soils on construction sites, racetracks, stock yards, etc.
48" twin drums, solid hitch ring
UPDATE 11/23/19 - total width 9 feet. Each drum measures 4’ wide. Weight is estimated at 10,000 lbs
REMOVAL BY APPOINTMENT: MUST REMOVE NO LATER THAN MONDAY, DEC 2ND UNLESS ALSO BUYING THE TRACTOR
Compaction Roller for conditioning soils on construction sites, racetracks, stock yards, etc.
48" twin drums, swiveling hitch
UPDATE 11/23/19 - total width 9 feet. Each drum measures 4’ wide. Weight is estimated at 10,000 lbs
REMOVAL BY APPOINTMENT: MUST REMOVE NO LATER THAN MONDAY, DEC 2ND UNLESS ALSO BUYING THE TRACTOR
No Reserve
Land roller 12 feet wide
Sturd-E Built (Bernau & Sons)
REMOVAL BY APPOINTMENT: MUST REMOVE NO LATER THAN MONDAY, DEC 2ND UNLESS ALSO BUYING THE TRACTOR
Former manure wagon converted to a water hauler
Believed to be 2,500 gallons
Soaker and mister
PTO drive
NOTE TIRE CONDITION - CONSIDER TRAILERING
REMOVAL BY APPOINTMENT: MUST REMOVE NO LATER THAN MONDAY, DEC 2ND UNLESS ALSO BUYING THE TRACTOR
NO RESERVE, NEW commercial grade Made in the USA (2015 Model) - Valued at over $3K
Iron & Oak Model BHH3013GXFD - Serial # 0215 1050
Pick up at seller's location required by 5PM on 12/11/19. Call Jon to schedule a time for removal (641) 420-5417
Pump 16 GPM
Hydraulic Fluid Capacity 9.5 Gallon
Engine: Honda GX270 9 HP
Cylinder Bore 4"
Cylinder stroke 24"
Dry Weight 700 lbs -- unit comes dry / no gas / no fluids
Mfg year 2015
Full Warranty / Manuals Included
Trailer top speed 35 mph
MSRP $3099
Pick up required by 5PM on 12/11/19. Call Jon to schedule a time for removal (641) 420-5417
Almost a whole reel of new hose! 350 Feet of Gates Adapta-Flex hose. Multipurpose red
Located in Mason City. Contact for freight quote.
No markings to indicate grade or manufacturer. Measures 90 feet in length. 3/8 ID
141 feet of 3/8" inside diameter Goodyear Ortac non-conductive hose. Made in USA
A box of eight door latch assemblies. Keys missing. These were installed new on a service body then removed shortly after. Located in Mason City. Shipping available.
Quantity 2 new E Channel for cargo trailers. Use with 3" cargo straps. Each measures 114 inches. Pick up only in Mason City.
Included in this lot are four load binding chain straps, chains and a steel drawer with latch. Cart shown is not included.
Drawer measurements: 8-1/2" wide x 4-3/4" high x 46" long
Contact for shipping quote. Located in Mason City.
Quantity 2 new E Channel for cargo trailers. Use with 3" cargo straps. Each measures 114 inches. Pick up only in Mason City.
Quantity 2 new E Channel for cargo trailers. Use with 3" cargo straps. Each measures 114 inches. Pick up only in Mason City.
Lot includes quantity of 12 E cargo channel. Located in Mason City.
80 Gallon Dresser Industries 400 Series Air Compressor with large motor; serial # 453X16096. Built 1977. Unit is currently disconnected. Seller can offer assistance with loading. Seller is a construction company that bought a building which included this compressor and is selling it because he only needs one compressor. He states that it works as it should. Electrical box on the wall is shown as an example and is not included. Please consult a qualified electrician regarding proper installation. Pick up only in Clear Lake, Iowa.
Paint sprayer was serviced after last use. Seller has no further use for it and is selling. Pick up in Clear Lake, Iowa. Shipping available - contact for shipping rates.
Lot includes 3 trusses total. Two end gables and one truss. Pick up only in Clear Lake, Iowa.
Measuring 11'6" with 2 ft overhangs
One used laundry tub with hot/cold faucets in good condition. Legs not included. Includes a bonus set of washing machine fill hoses. Appears to be in good condition. Located in Clear Lake, Iowa.
Clausing Lathe Model 5914, Serial #506211. Tailstock supports long work, and hold tools for reaming and cutting. Box of tooling included. View manual at http://vintagemachinery.org/pubs/181/3407.pdf
Update 1/2/20 - seller states that the lathe works well and is set up for 230V 3PH and he believes it is dual voltage if one wanted to set it up for 460V. It was used up until mid 2019.
If you have assets to sell, I would be honored if you would consider giving me a call at 641-420-5417. Trader Auction Company is located on Highway 65 South in Mason City, Iowa. Serving northern Iowa and southern Minnesota, including Mason City/Clear Lake, Algona, the Iowa Great Lakes area (Okoboji/Spencer/Spirit Lake/Esterville), Charles City, Cresco, New Hampton, Fort Dodge and Waterloo, IA, and Albert Lea, Austin and Rochester, MN.Rockwell Vertical Milling Machine. Nice sturdy and versatile piece of equipment. Adjustable spindle speeds. Works as it should. Includes mill vise and connecting rod. Cranks are smooth. Great machine for anyone from the professional tool and die maker to the home machinist. 110V
Update 12/30/19 - added photo of the connecting rod (included)
Radial Drill Press. Drill head slides forward and back and locks into place on the upper rail. Head assembly pivots and locks into positon at four points. 1,755 RPM. 1 H.P. Electric Motor 110/220V Single Phase. Currently wired with a 110V plug. Tested/runs.
DeVilbiss 3-phase industrial air compressor. Plate indicates it is a Type UP-574-7, #111479 (Patent 1,831,165). Includes 3P electrical switch box.
Update 1/2/20 - Per the seller, voltage is set up for 230 volts 3PH. Seller believes it is dual voltage for choice of 230/460V. Seller states that this air compressor works very well and the only reason they are selling it is because they purchased a router requiring higher CFMs. It was in service until very recently and it ran great.
Powermatic Drill Press. Speed adjustable guide on the front. Chuck included. 3P 208-220, 440V
Baldor 3/4 h.p. pedestal grinder, model 8123W, serial#F1274. 3 Phase 208-220/440V, 12 ft power cord, 30A 250V plug. Tag indicates bearings were replaced in 2006. Pedestal measures 32-3/4" tall.
Deburring tumbler for removing flashings and burrs from metal castings. Unit on casters. 120V. Needs work. Unit turns on, unable to confirm operation. Belt missing. Unit measures 28" wide, 23-1/2" deep, 35" tall.
Two HID High Bay Lights, direct wire.
Generator with no visible markings indicating what it came out of. Positive/negative posts. Condition unknown. Four bolt pattern 12-1/2" x 7-5/8". Heavy, probably full of copper.
Hydraulic Barrel with Pump, 0-15 GPM, 3,000 PSI
Motor: 230/460V 3PH - 3,520 RPM - 15hp
Barrel: 29" tall x 19" diameter
Hi-Power Industries
Skilsaw 10" miter saw model 3810. Tested-runs good (video included). 120V / 15A electric motor. Double insulated. It was being used for cutting steel. Blade included. Power cord with two prong male plug in good condition. Brake works as it should. Stationary model, no mitering capability.
