2007 Genie Z34/22N 2WD Boom Lift
S/N: Z34N07-7224
Hours: 781
Recent trade-in, all functions seem to work (video attached)
JLG 1930ES Scissor Lift
S/N: 0200135212
Hour Meter Reads: 296
Does NOT work, one drive motor is bad
1999 Genie GS2668 Scissor Lift
S/N: 16221
Hour Meter Reads: 2713
Platform Height: 26'
Recent trade-in, runs and lifts but steering needs work. The steer cylinder anchor broke away from frame.
Vermeer Tree Spade
Model: TS-44A
Serial Number: 695
Trailer Mounted.
Pintle Hitch.
16hp Briggs & Stratton Gas Engine.
Extendable Tongue. Jack Stand
Status: Tested Operational - Check out the Video!
This piece of equipment does NOT have a title. There is no transfer necessary for a single-use trailer like this one.
Additional Info: Buyer's Premium is 10% for items that sell above $5,000. Buyer's premium is capped at $1,000/item. Certified Funds Required for all invoices over $5,000.00.
It is the buyer's responsibility to inspect all vehicles prior to bidding. While we do our best to disclose any known issues about this piece of equipment, it is incumbent on the bidder to understand there may be issues with used equipment that we are unaware of, including minor mechanical issues. Please take time to review all photos prior to bidding, as they often contain important information concerning the overall condition of the equipment.
Lot of (2) Loegering Versatile Track System Skid Steer Tracks VTS S2 R
Model: VTS S2 R
Serial Number: 24080
One Pair of Tracks
Weight: 1090 lbs.
Lot of (2) John Deere Skid Steer Over Tire Tracks 7512
Model: 7512
One Pair of Tracks
Lot of (2) Grouser Skid Steer Over Tire Metal Tracks with Rubber Feet 7510
Model: 7510
One Pair of Tracks
John Deere Skid Steer Loader 5575
Model: 5575
Hours: 1591.3
12V Battery, 40A Alternator
Length: 10' Width Over Tires: 5' Ground Clearance: 8-1/4" Wheelbase: 3.12'
Engine: 3-cylinder, 39hp. Weight: 4500 lbs.
Seller Notes: There is a hydraulic leak, not sure where.
Skid Loader Starts, Runs, and is Operational! No Reserve! See Video!
There are a set of forks (Lot #758) and a bucket (Lot #759) that fit this skid loader but are being sold separately.
Additional Info: Buyer's Premium is 10% for items that sell above $5,000. Buyer's premium is capped at $1,000/item. Certified Funds Required for all invoices over $5,000.00.
It is the buyer's responsibility to inspect all vehicles prior to bidding. While we do our best to disclose any known issues about this equipment, it is incumbent on the bidder to understand there may be issues with used equipment that we are unaware of, including minor mechanical issues. Please take time to review all photos prior to bidding, as they often contain important information concerning the overall condition of the equipment.
Bucket Attachment 6' - will fit a 5575 John Deere skid loader.
Pallet of rough sawn lumber, presumed to be oak? I am not a lumber guy, nor did I break the banding to sort through it.
It was removed from an old cabinet makers shop, and has been air dried indoors for several years.
Pallet measures approximately 26" wide x 72" long by 7 rows high
Various sizes from 1x4 to 1x8 dimensions, there are a couple of planed boards in the lot.
Pallet of Rough Sawn Pine.
It was removed from an old cabinet makers shop, and has been air dried indoors for several years.
Pallet is approximately 36" wide x 72" long
Various sizes from 1x3 through 1x8
Pallet of Butternut, some boards are rough sawn and some boards have been planed, I did not break the banding to sort through it, presumed to be butternut through out the bundle, there could be rogue board in the lot.
Pallet measures approximately 40" wide x 72" long 6 layers tall.
It was removed from an old cabinet makers shop, and has been air dried indoors for several years.
This butternut has the notorious worm holes as seen in the photos, part of the woods character.
Various sizes from 1x6 through 1x10 and some 2x4 stock..
Pallet of Butternut, I did not break the banding, all the wood appears to be the same species.
It was removed from an old cabinet makers shop, and has been air dried indoors for several years.
Some of the wood is rough sawn and some have been planed.
Pallet measures approximately 36' wide x 72' long 10 layers high.
This butternut also has the notorious worm holes, part of its character.
1/2 of this pallet is pine and the other 1/2 is aromatic cedar.
Some of these boards have been planed and cut down as seen in the photos.
It was removed from an old cabinet makers shop, and has been air dried indoors for several years.
Pallet measures approximately 36" wide x 72" long 8 layers high.
Assorted dimensions.
Aggregate Conveyor Belting
Rubber Master Curling Flap
Size 35-26
Approximately 6 Flaps one price.
Goodyear Tire
19.5 x 24" Traction Tire
Firestone Lull Tire
17.5 x 25"
Reclaimed Lumber
2 1/4" x 8' long
Assorted width 5", 6",8",12"
Shorter stack of the 3 pallets
Reclaimed Lumber Pallet #2
2 1/4" x 8' long
Assorted width 5",6",8",12"
Reclaimed Lumber Pallet #3
2 1/4" x 8' long
Assorted width 5", 6", 8",12"
Slit Rim Tire
10.00 x 20"
Conveyor Tire
9.00 x 20"
Ford Model A-64 Articulating Wheel Loader
This Machine Is In Running Working Condition. This Item Has a Reserve
Bobcat 5600 Tool Cat 61 hp Diesel Motor
Machine Will Show Some Rust. It Is In Running/Working Condition. SELING WITH NO RESERVE
2002 Bobcat S250 Turbo 2 Speed Ski Loader Skid Steer
This Machine Is In Running/Working Condition. This Item Has a Reserve
Ford Model A-64 Articulating Wheel Loader
This Machine Is In Running Working Condition. This Item Has a Reserve
