Offset Printing Presses (surplus to ongoing operations) - Fergus Falls, Minnesota
Auction Location: 417 W Stanton Ave., Fergus Falls, MN 56537 / Phone: 218-736-7000
Commercial & Industrial
Surplus commercial printing presses. Ryobi 2-color 14 x 20", Ryobi 2-color 12" x 18, Didde Apollo Web 14" wide x 8-1/2" cut off. Building is dock high however presses are very heavy and weigh 3,000 pounds up. Buyer to bring material handling equipment necessary to safely remove presses. Presses are surplus to the needs of Nelson Bros. Printing, a 117 year old printing company and being replaced by new large format digital equipment. All equipment is in working condition, however bidders should avail themselves of the buyer inspection periods prior to the auction.
ADDITIONAL INSPECTIONS ADDED: Monday, March 6 and Tuesday March 7 from 9:00 to 4:00 p.m. daily. See Travis.
|Showing 1 to 20 of 20 items|
04:00 pm CDT
Ryobi model 512 sheet fed offset printing press. 14 x 20 sheet size. Excellent condition. Is currently installed in working environment. 2 color Capable of 11,000 sheets per hour. This was bought new in 1995 and been run by one pressman since new. If you need a 14 x 20 this is the one for you. Being replaced by new large format digital.
Building is dock high, but this machine weighs 6,800 pounds so you'll need material moving equipment to move it on to your truck. Related supplies incliuded.
Footprint of the press is 7 foot long by 40" wide but need more space to operate.
04:01 pm CDT
Ryobi model 3302 M offset printing press. 2 color press. Stealth water system. Drying system attached. Currently installed in working environment, clean, but has not been run for a while. Turns on and turns over. We have another one of these presses and just do not need it.
Footprint needed for press is 7" long by 32" wide. Approx. 3,000 pounds.
04:02 pm CDT
Runs 40" inch diameter rolls up to 14" wide with 11" cut off.
Apollo Didde 2 color A 850 A Two color or two sided web offset printing press. Runs a 40" roll up to 14" wide with an 8-1/2" cut off. Runs at 25,000 impressions per hour. Has a turnbar so you can run as a two color on one side or use the turnbar and run single color on two sides. We used this press frequently to very run long run jobs. Roll paper is cheaper than sheet and ink is much cheaper than toner so it's very cost effective for long runs that are 2/0 or 1/1. Currently installed in working environment. Building is dock high but the machine weighs about 3,000 pounds so bring material moving equipment. Comes with plate bender. Guessing this is late 1980s to early 1990s age. Runs. Replacing with large format digital.
Footprint needed for press is 8-1/2" feet long by 32 inches wide.
04:03 pm CDT
Large lot of offset inks. Variety of inks in 1 pound and 5 pound cans.Brands include VanSon, Superior, Preferred, Flint. Mostly spot colors, some process in rubber base and acrylic. Some unopened. Big lot of assorted inks.
04:04 pm CDT
Two Yellow fire safety cabinets with racking. Lot contains two fire safe cabinets with supporting racking. Lot contains 2 fire cabinets and the racking. Large enough to hold a drum of press wash or other flameable liquid or materials. Standard teardop pallet rack is adjustable height.
Comes with four cross bars that are 9' 3" long x 36' deep. Pallet racking is 7-1/2' tall. 3 cross bars are included, two at bottom and one at rear top. Two cabinets are included but racking would hold up to three cabinets.
Believe cabinets are 65" tall x 34.5 x 34.5 and made to hold 55 gallon drums.
04:05 pm CDT
NuArc model N1500 plate burner. Unit works. Pulled out of service 1 year ago. Lamp fires, pulls good vacuum, exhaust fan works.
115 volt, 18 amp requirement.
04:06 pm CDT
Light table used in graphic arts setting. Works fine. 54 wide x 40 deep. NuArc brand.
04:07 pm CDT
USI model CRI 40 laminator. Like new.
Takes up to 40" Wide Rolls of laminate. 220 volt, 12 amp circuit needed. Adjustable temperature and speed. Reverse and independent fan switch.
Works great. Only used for one customer, very little use. Selling because item is no longer needed. Paid $4,000 new. Perfect for posters, maps, prints, signs, etc. It's pictured on a 48" stainless rolling stand which is not included but you can buy one at Sam's Clubs inexpensively.
04:08 pm CDT
Heidelberg Windmill with hot foil stamp attachment. 10" x 15" chase size. In good working order. We have 3 others and just don't need four. Very heavy press weighs 3,000 pounds. Make sure you come during the inspection periods to see machine in operation. Machine will be disconnected from electric after the inspection period ends.
Buyer needs to bring help and material handling equipment. Building is dock high but machine is heavy and also top heavy. You'll need jacks to raise press to palletize, a very sturdy pallet, lag bolts, machinery straps, etc.
Serial # MH9145
04:09 pm CDT
Three Ryobi 2800 presses for parts. One works but has trouble with gripper. Unknown condition on other press.
04:10 pm CDT
NuArc model PS30 Plate washing sink.
Unit is currently installed and working. Will be ready unplumbed and ready for removal before inspection day.
04:11 pm CDT
Light safe used in print shop darkroom for offset plates. would work for film, plates or just cool storage.
04:12 pm CDT
04:13 pm CDT
Brackett brand paper jogger. Works. Fully adjustable. Surplus equipment.
04:14 pm CDT
Waking machine, previously used for paste-up operations in a print shop. But may also work for crafting or art use. Not tested.
Shaefer brand. 14" wide.
04:15 pm CDT
Variety of halftone screens for printing plate making. All in protective tubes. Variety of darkness percentages, most are 133 line screen.
04:16 pm CDT
Solvent plunger can. Used in print shop.
04:17 pm CDT
3 heavy duty commercial staplers, new in box.
04:18 pm CDT
New Hermes pantograph machine. Used in engraving. 2 type sets included. Motor mount is broken, but we believe is mostly complete.
04:19 pm CDT
25 Gallon Porter Cable air compressor. 135 PSI. 5.8 Cu. ft. per minute. Runs when plugged in, and seems to hold air.
Many of these items are very heavy, and removal may require specialized equipment or additional help to safely remove the equipment. Neither the auctioneer or seller have additional help available for removal, please plan to bring appropriate equipment and necessary trained labor to remove. Building is dock high. . If you have questions on removal times or requirements, please contact Travis @ Kiefer Auctions at 218-736-7000.
PLEASE INSPECT!!!! It is extremely important to inspect before bidding. Buyers to bring necessary equipment and labor to remove presses. Extremely heavy.
If you have questions please ask. Items are sold As is, Where Is, without warranty or guarantee of any kind. Buyers should rely entirely upon their own inspection and information.
|Wed, Feb 22, 2017||09:00 am - 04:00 pm|
|Mon, Feb 27, 2017||09:00 am - 04:00 pm|
|Wed, Feb 22, 2017 09:00 am thru||Wed, Mar 01, 2017 04:00 pm|
|Mon, Mar 06, 2017||09:00 am - 04:00 pm|
|Tue, Mar 07, 2017||09:00 am - 04:00 pm|
|Tue, Mar 07, 2017||04:00 pm|
|Thu, Mar 09, 2017||09:00 am - 04:00 pm|
|Thu, Mar 09, 2017||09:00 am - 04:00 pm|
|Fri, Mar 10, 2017||09:00 am - 04:00 pm|
This auction is contracted and managed by Kiefer Auctions.
This affiliate accepts Credit Card, Cash or Check.
By placing a bid on this auction you are agreeing to the auction specific terms listed below in addition to K-BID user terms. For auctions contracted and managed by an Independent Affiliate, K-BID Online, Inc. is acting as a venue only and will not be involved in any disputes or issues regarding this auction.
Everything is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.
There is a 13% BUYERS PREMIUM (13% BP) on this auction. All NON-Credit/Debit Card payments MADE IN-FULL (invoiced amount) will receive a 3% Reduction in BUYERS PREMIUM (10% BP).
Applicable Minnesota Sales Tax will be collected.
At the close of the auction active items will remain open until no bids have been received for three minutes.
IMPORTANT NOTE: If the high bidder of an item does NOT acknowledge the purchase, K-BID systems reserves the right to determine how and to whom it will be resold. If we determine that the winning bid was not a bona fide bidder, the item WILL NOT AUTOMATICALLY go to the next second-highest bid.
417 W Stanton Ave.
Shipping is not available for this auction. Unless arrangement is made prior to removal date.