Everything still works and you can bid, however bids placed by others and timers will not refresh automatically. You you will need to refresh the page to see those changes!
Auction Location: 13720 400th Ave NW, Angus, MN 56762
Phone: 218-289-4134Lot Categories: Hand Tools/Hardware (70), Antiques/Vintage (59), Automotive/Mechanical Equipment (57), Attachments (19), Farm Supplies (18), Farm Implements (10), Power Tools/Shop Equipment (8), Tractors (7), Woodworking Equipment (5), Construction Material/Supplies (3)
08/23/2018 08:00 pm
830 Case Diesel Tractor with Case-O-Matic
Comes with Dual Tires (not shown but are in the barn)
Three point works
The gauges that work are the Amp, oil pressure, and temperature gauge. The others do not. (fuel & RPM)
The fuel system has a slight leak to it.
Tires hold air but are old.
Tractor starts but needs new (6 volt) batteries. It took us two battery chargers and a third battery to get it started. If you want to drive it on to a trailer please bring the necessary tools to start it. Such as new battery or one's to supplement the current battery system. I used it all day to pull the other tractors out of the barn and it started every time that one day. The next day it did not have enough cranking amps to start. Please call Danny at 218-289-4134 with any questions.
The fuse holder fell out so the lights do not work.
It also come with a few manuals.
CASE CC 4 with front crank start
The tractor does not start but the engine is not froze up. The front handle cranks the engine around.
Manufuactured by the J. F. Case Company Racine Wisconsin # C350947
Three tires hold air and the forth one does not take air due to the air valve is pushed in and I cant get a air chuck on it. But there is some air in it and I was able to pull it out. Bring a heavy trailer to pick this one up. Call Danny at 218-289-4134 with questions.
An excellent overhaul project.
It comes with a manual that is very old for the CC model tractor.
CASE VC Row Crop Tractor from the V series
Narrow Front Tractor
Does not start but the engine is not froze up as the Flywheel turns by hand.
Body seems in good shape please see the pictures for the details.
Tires hold air.
Tractor was stored indoors.
Allis Chalmers WF 201 Series Tractor with Hand Crank Start
Body is in solid shape and the tires do hold air.
The engine does not start but the hand crank turns the motor over.
There is a 6 volt battery attached to it but I have no idea how to attempt to start it.
The year is also unknown.
8-14-18: I made an error on the removal days for this item. In Minnesota we can not sell a vehicle on Sunday. Please pickup the vehicle on Saturday (8-25-18) or I can meet you on Monday (8-27-18). Give Danny a call with any questions at 218-289-4134. Thank you.
International 1100 Pick-up Truck with Topper from 1967
Plate# 294 BYV
The title is clean.
The motor turns over but does not start with a boost. I believe the batteries are shot and need replacement.
There is some rust on it but in general the body is in good shape.
There is a few dents in it most notably on the back drivers side.
The inside seems to be in pretty good shape.
Tires all hold air and did not need to be inflated.
You also get what is inside of the box.
This is a stick shift at the steering wheel.
Please see pictures.
Allis Chalmers WD45 with Vaughn Loader & Winter Heat Cab
It has two 6 volt batteries for the electrical system.
I think that both batteries are shot and need replacement.
It turns over but there is not enough cranking amps to turn the motor over enough to start it. Even with two battery chargers.
Tires hold air.
Heat Cab is from TSC and mostly complete. It also comes with two umbrellas.
Loader is 5 feet wide.
There is a dent on the gas tank from something falling on it.
I am no mechanic but the anti-freeze has a oily base to it and it looks to me there maybe a head gasket issue. Give Danny a call at 218-289-4134 for details. The engine oil is black.
It also comes with a manual that I think covers this tractor series.
Vintage Ford Mustang Emblem & Granada Gas Cap mix lot
You also get everything else in the pictures.
Locking gas cap with the keys (Motorcraft part 2 x0-211)
Random lot of radiator caps for newer and older vehicles
Two old car window replacement handles
Thermostat - untested.
Old fashion Hay rake
In fair shape and would look great as some kind of lawn ornament.
Most everything in this sale was stored indoors.
However this one was pulled out from the woods.
428 Cockshutt Self Propelled Combine
I believe in was made in 1963
No cab and no header that I can find.
In good shape with only one front tire flat.
No idea on the engine or how long ago it was started.
It has been stored in side and the body is in good shape.
It is still in the corner of the shed and you have to be able to pull it out and load it onto a trailer. We have no ability to do so.
Call Danny at 218-289-4134 for details.
Big pallet of 40 pound sand weights.
Stored indoors out of the sun.
Antique Hand Crank Heater MN 796-A
Looks in good shape it is just missing the crank handle.
Scale seems to be in good shape. I cant tell how accurate it is.
It comes with three weight's as seen in the pictures.
I do not know if they work or have any issues.
They were stored indoors.
Sears & Roebuck & Company Invincible Screw Plate tap & die set with wood box
B & Co. parts are
3/8 - 16 Tap
1/4 - 20, 5/16 - 18, 5/8 - 11, 3/8 - 16 Dies
Large Handles for both the Tap's & Dies
The bottom three are Butterfield & Company Taps:
5/8 - 11, 1/2 - 13, & 7/16 -14.
These tools have been used but are in over all good shape.
The Engine turns over and there is plenty of spark as I had my hand to close to the spark plug when I pulled the cord.
No idea if the water pump works.
Wheel is 3 feet in diameter.
You get everything in the cart.
Everything in the picture.
2 Vintage Pioneer Fanning Mill's plus accessories
It was stored in a small shed. One was sitting where the roof leaked so one has been wet and parts are rotten. The other one was stored where there was no leak and is better.
This is a project for you as nothing works or is complete.
I did all the hard work and pulled it out of the shed and it is in a easy place to load up.
Manufactured in Minneapolis, Minnesota
I will help you load this up.
Call Danny at 218-289-4134 for details.
You get two in this lot.
Never know what you will find in here.
Set is not complete as there is some double's.
2x 13/64 - 15/64
5/16 - 9/32
13 of big ones
18 smaller ones
I have tried to show you what is in the box's as best I can.
These parts have been sitting in doors for a long time.
The owner was a mechanic.
No idea if any work, we have nothing to test is on. All the parts look to be there.
The light seems to be next to mint.
11/16, 5/8, 3/4, 9/16, 7/16, 3/8, 1/2 Sockets
No way to test them. There are no cracks on or chips on them.
AL 2 Replaces 7021954
AL 4 Replaces 227300 - 229531
New in box
New in Box
Snap-on 1/2 Drive Torque Wrench Series 200 22" long
There is a slight dent on the upper handle.
Cables need some repair
I do not know how good the battery is but the light comes on and the air compressor does turn.
Test and Works
Tested and works.
Looks good but the bulb is burnt out.
Good shape and ready to be installed.
Vintage Milk Can 2 feet high Excellent Shape
Very tight cover
13" diameter at the bottom.
There is some writing on the handles but I cant make it out.
Only the very bottom looks to have any ware on it.
with 2 1/4" on each end.
Plus some hardware.
Very Cool looking; tested and works.
Motor turns over that is about all.
A good fixer-up project.
All are tested and work.
They were not tested under pressure but go up and down. Nothing is frozen here.
Very heavy item.
Tested and works
The table moves on 4 metal wheels and you get everything on it and under it.
Bring extra help for loading this one.
1" drive socket
1 1/2 Socket I believe
Several kinds and lengths of roller chain.
1 is in a unopened bag and the box shows that it is 10 feet of 60 heavy.
Very nice to add to you collection.
I bet they don't make these anymore.
You get everything in the picture.
Various pitch forks, shovels, Hoe's, ground diggers
Most are vintage
Not used just stored and forgotten.
Valvoline: 1.5 gallon & 4 quarts 10w-30
Havoline: 10 quarts of 30 HD.
Ruff looking but you can make them look nice.
They have been stored indoors.
If you use your GPS to find this sale make sure that Angus 56762 is used. The estate is about 4 miles West from Tabor Minnesota but Tabor has no zip code.
Easy way to find it is to head North of East Grand Forks, MN on US Hwy 220 for about 10 miles. Take a right on Polk County Road 23 for 4.3 miles heading East. Turn right (South) and it is a little bit down the road on the left or East side of the road. Signs will be posted. Call Danny at 218-289-4134 with any questions.
Check out dra-auctions.com or like me on Facebook search for dra-auctions.
|Bid Range||Minimum Increment|
|Hammer Price Tier||Buyer's Premium||Cap|
|$0.00 - $4,999.99||13.00%|
|$5,000.00 - infinity||10.00%||$1,000.00|
This auction is contracted and managed by: DRA Auctions
Manager: Danny Anderson
13720 400th Ave NW
Shipping is available on most items through DRA Auctions.
I can ship via US Postal Service, UPS, or Fedex at this time. I will always offer you the cheapest and most efficient way to ship.
Buyer pays all shipping charges plus a $5.00 handling fee for each package shipped. I can combine the handling fee if you buy more than 1 lot from me.
Please contact Danny Anderson at 218-289-4134 or text me a question at that number. Please include the lot number or item name in the text. You can also e-mail me at firstname.lastname@example.org with any questions.
Everything will be shipped with care.