Auction Location: 101 EAGLE DRIVE, Balsam Lake, WI 54810
Phone: 952-920-8922
Lot Categories: Commercial Supplies (198)
Auction Closed
08/12/2020 07:05 pm
Closed
Holzma panel saw MODEL D7260. Saw needs a contact relay replaced and then it will run just fine. 3 phase.
C4 MDF Oak Veneer. 1/4" x 4' x 8'. 25 sheets.
C4 MDF Oak Veneer sheet goods. 1/4" x 4' x 8'. 25 sheets.
C4 MDF Oak Veneer sheet goods. 1/4" x 4' x 8'. 25 sheets.
C4 MDF Oak Veneer sheet goods. 1/4" x 4' x 8'. 26 sheets.
Melamine MDF Light Elm sheet goods. 1/4" x 5' x 8' 15 sheets.
Melamine MDF Light Elm sheet goods. 1/4" x 5' x 8' 15 sheets.
Maple A4 MDF sheet goods. 3/8" x 4' x 8'. 7 sheets
Maple A4 MDF sheet goods. 3/8" x 4' x 8'. 7 sheets
Bending Ply Kerfkore sheet goods. 1/2" x 4' x 8'. 6 sheets.
Bending Ply Kerfkore sheet goods. 1/2" x 4' x 8'. 6 sheets.
Bending Ply Kerfkore sheet goods. 1/2" x 4' x 8'. 6 sheets.
Col-Met complete spray booth in fully operational condition. Model 125-1008-20-01-01. 120" wide x 276" long. 480-120 volts. 3 phase. 7.6/6.0 FL Amp. Booth has working exhaust system that roof mounts. You also get a pallet containing 15 new filters for the exhaust system. AIR GUARD VARIFLOW SC FILTERS WITH 90/95% EFFICIENCY. 23-3/8 x 23-3/8 x 11-1/2" . Model N2424B00.
YOU MUST DISASSEMBLE THIS UNIT FOR REMOVAL BY YOURSELF AND IT MUST BE FINISHED AND OUT THE DOOR BY 2 PM ON LOAD OUT DAY. WE ARE SUGGESTING THAT YOU ARRIVE EARLY TO ACCOMPLISH THIS TASK IN A TIMELY FASHION. YOU WILL NEED A HIGH SPEED SCREW GUN TO TAKE OUT ALL THE BOLTS.
Weigh-Tronix XL scale. Model XL5401-SB1T. Capacity: 1000 lb x .5 lb. Class 3, 19" x 28". MINNESOTA MADE AND WORKS.
Sand blast cabinet with light, and exhaust vac system, mounted on a steel stand. Item is operating condition. Blast cabinet is 51-1/2" x 30" x 39", stand is 49 x 48 x 36" tall.
Brandt edge banding machine. Model KTD 51. 440 volt. runs.
Cincinnati dust collector with bag. Model 200S. 3 phase, type TS. Works.
Cincinnati dust collector with bag. Model 200S. 3 phase, type TS. Works.
Delta cust collector with bag. Badge says single phase. Works.
6 Binks spray pots - non-operational . 2.5 GALLONS
4 Binks non-operational spray pots. 2 are 2.5 gal, 1 is a 3 gal, 1 is unknown.
2 Graco non-operational spray pots. One is 9.8 gal the other is unknown size.
2 Large non-operational spray pots.
5 - 5 Gallon safety cans. No nozzles.
5 - 5 Gallon safety cans with nozzles.
2 Oily Waste cans 1 is 10 gallons and 1 is 6 gallons. Also includes 1 - 5 gallon safety can.
A 57 x 30 nutting cart in nice condition.
Industrial cart-possibly Nutting. 50 x 24. The only marking we can find is MW8. Nice condition.
Bush Desk and 9 upper cabinet units as shown in photos. Nice condition.
2 Large traditional wooden desks. Both are 72 x 36-one has a glass top. Fair condition.
12 X 3/4 Phillips flat head wood screws - zinc QTY 83
8-11 X 1 phillips pan head wood screw 410 SS QTY 700
8 x 1 phillips pan head wood screw black QTY 2100
3/8 x 1-1/2 lag screw black QTY 175
8 x 2 phillips round head drilling screw for SS QTY 21
8 x 7/8 phillips pan head self tapping sheet metal screw zinc QTY 855
1/4-20 x 3/4 high strength grade 8 hex head screw zinc QTY 725
1/4-20 x 5/8 alloy steel socket head screw zinc QTY 225
1/4-28 x 3/4 hex head drive socket cap screw black QTY 10
1/4 -20 x 3/8 phillips flat head machine screw zinc QTY 50
1/4-20 x 2" flat head screw zinc QTY 40
1/4-20 x 1" phillips flat head machine screw zinc QTY 220
10-24 x 7/8 phillips pan head machine screw zinc QTY 1637
3/8-24 x 1-1/2 button head screw black QTY 10
1/4-20 x 1-1/4 oval head screw SS QTY 25
8-32 x 1/2 alloy steel cup point set screw black QTY 67
8-32 x 1/8 cup point set screw SS QTY 60
1/4-20 x 1.181hex drive joint connector bolt zinc QTY 386
1/4-20 trim washer SS QTY 25
3.8 ID x 2OD x .08 thick fender washer oversize zinc QTY 285
5/16-18 grade 2 hex nut steel QTY 6315
3/8-16 grade 2 hex nut zinc QTY 45
1/2 -13 grade 2 jam nut steel QTY 45
1/2-13 x 2 Square tube plastic insert black QTY 84
6-32 x 3/8 insert nut hex drive type E zinc QTY 2181
1/4-20 x 7/16 tee nut insert without prongs for wood steel QTY 150
1/4-20 x 7/16 tee nut insert without prongs for wood steel QTY 697
5/16-18 x 1/2 (.498) hex lock nut zinc QTY 1715
1/4" dia x 3/8" long low profile domed head rivet SS QTY 231
1/8" dia x 3/8" long blind rivet aluminum-plain QTY 4987
1/2 x 3 multi grove wood dowel QTY 4000
1 x 1 velcro squares black QTY 3150
1-13/16 x 5" sriplox joint connector Pro 55 QTY 30
156 MM CTC handle oil rubbed bronze QTY 14
3-3/4 (96MM) center to center satin satin nickel drawer pull QTY 14
12 MM x 40 MM steel angled strike plate nickel QTY 59
7/8 x 3/4 x 1/2" strike plate L shape back QTY 780
0 MM wing mount plate w/vertical adj. nickel plated QTY 9
4 MM base plate for nexis hinge QTY 13
8" full extension , side mount, 100 # drawer slide, anochrome QTY 50
26" full extension , side mount, 150 # drawer slide, anochrome QTY 9
14 inch 3/4 variable height pencil drawer drawer slide QTY 24
1/4 x 1/2 screw on rubber bumper black QTY 450
1-1/8 W X 1-1/8 LONG X 18"H aluminum end post satin anodized finish QTY 7
1-1/8 W X 1-1/8 LONG X 18"H aluminum corner post satin anodized finish QTY 1
1-1/8 W X 1-1/8 LONG X 18"H aluminum center post satin anodized finish QTY 6
Please note: this auction is in Balsam Lake, Wisconsin.
This auction offer a complete, open front spray booth. Booth has lights, exhaust system, is in nice condition and it works. We also have dust collector units, spray pots, safety cans, sheet goods, hardwoods hardware AND EVEN A NUTTING CART.
INSPECTION IS BY APPOINTMENT. CALL MICHELLE AT 952-920-8922
LOAD OUT FROM BUILDING 3 DOOR 17. LOOK FOR SIGNS.
DUE TO COVID 19 EVERYONE WILL BE REQUIRED TO WEAR A MASK. IF WISCONSIN HAS OTHER RULES THAT MUST BE FOLLOWED WE WILL TELL YOU WHAT THEY ARE AND ASK YOU TO HONOR THEM.
A CASHIER AND AUCTION STAFF WILL BE ON SITE THE DAY OF REMOVAL.
PLEASE ALSO BRING/WEAR SAFETY GLASSES AND A YELLOW SAFETY VEST IF YOU HAVE THEM. WE CAN SUPPLY GLASSES AND VESTS IF NEEDED.
Bid Range | Minimum Increment | ||
---|---|---|---|
$0.01 | - | $75.00 | $1.00 |
$75.01 | - | $150.00 | $5.00 |
$150.01 | - | $250.00 | $10.00 |
$250.01 | - | $500.00 | $25.00 |
$500.01 | - | $1,000.00 | $50.00 |
$1,000.01 | - | $5,000.00 | $75.00 |
$5,000.01 | - | $50,000.00 | $100.00 |
$50,000.01 | - | $75,000.00 | $250.00 |
$75,000.01 | - | $100,000.00 | $500.00 |
$100,000.01 | - | $2,500,000.00 | $1,000.00 |
Hammer Price Tier | Buyer's Premium | Cap | |
---|---|---|---|
$0.00 - $4,999.99 | 13.00% | ||
$5,000.00 - infinity | 10.00% | $1,000.00 |
This auction is contracted and managed by: Auctions for Business & Industry
Manager: Michelle Williams
This auction is contracted and managed by ABI - Auctions for Business & Industry. .
We do not take personal or business checks. We take visa and master card for up to $3,000.00. Wire transfers and cash are always welcome. For purchases over $3000.00 a wire transfer, Cashier Check or cash are the best way to go. A Cashier Check must be made out to ABI
FOR ONLINE PAYMENTS WE TAKE VISA AND MASTERCARD ONLY.
This auction is contracted and managed by an independent affiliate. By placing a bid on this auction, you are agreeing to the auction specific terms listed on this page in additions to the K-BID user terms and agreements.
K-BID Online, Inc. (K-BID) is responsible for maintaining the K-BID.com website. K-BID.com serves as the venue used by independent auction companies (Affiliates) to present their online auctions to bidders.
K-BID’s role in the auctions listed on K-BID.com is limited to providing the venue for affiliate auctions. Affiliates are not employees, agents, representatives or partners of K-BID Online, Inc. K-BID’s knowledge about individual auctions and individual auction transactions is limited to the information appearing on the website.
By placing a bid on K-BID.com, bidders are verifying they are at least 18 years old and acknowledging they understand and will comply with both the K-BID.com website terms and the auction specific terms. Bidders MUST NOT share their password or account information with anyone. Bidders are responsible for bids placed on their account.
Inspection dates/times are available for every auction. Bidders are strongly encouraged to inspect prior to placing bids. Removal day is not inspection day. When an auction ends, and the winning bidder invoice appears on the bidder’s dashboard, the bidder is obligated to honor their bid(s).
Every auction item is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.
Bidders are responsible for knowing and complying with auction terms. Failure to comply with removal terms may result in bidding privileges being disabled. Once a bid is placed it cannot be retracted.
Sellers and their agents are prohibited from bidding on their own assets.
Items with a reserve will not be sold unless the reserve price has been met.
At the close of the auction, active items will remain open until no bids have been received for three minutes.
Applicable sales tax will be collected by the affiliate managing the auction.
In the event that bidding rights are terminated due to no-show invoices, bidders MAY be reinstated at the discretion of K-BID only after a penalty fee of 20% of the unpaid invoice(s) and a reinstatement fee of $25.00 has been paid to K-BID and a scanned copy of your driver's license emailed to us. INVOICED ITEMS WILL NOT BE AWARDED. The payment is punitive and meant to deter no-shows. Duplicate bidder accounts will be deactivated when they are determined to exist. If possible and at our discretion, K-BID reserves the right to delete any bid we believe has been placed by a suspect bidder. Any registration that shows up on our fraud detection system may be placed on hold and bids removed until the user is verified. K-BID Online, Inc reserves the right to disallow anybody from bidding on its website. Cases of obvious bidding with no intent to redeem will be referred to appropriate legal authorities.
Affiliates may lower a lot reserve at any time before or after an auction closes. If the reserve is lowered while the auction is in progress, the applicable reserve message will appear below the Next Required Bid information (Reserve Not Met or Reserve Has Been Met); the asset will sell to the high bidder if the lowered reserve amount is met. If the reserve is lowered after the auction closes, the highest bidder at auction close will receive a winning bidder invoice.
Once an auction begins its closing process, outbid notifications will not be sent.
Once a bid is placed it cannot be retracted.
WE DO NOT HOLD MERCHANDISE AND WE DO NOT SHIP!