St. Cloud, MN
No Images Available
| Shipping: | Yes |
| Online Payment: | Yes |
Environmental Stress Systems Mechanically Refrigerated Thermal Platform MRTPG22211K-001 .
Refrigeration Plant: Dual Stage Cascade (-70C).
Cabinet Configuration: Under Bench.
Heat Rejection: Air-cooled Condenser.
Controllers: RM w/std bus and modbus rtu eia-232/485.
Thermal Range: 22C to 70C.
Refrigerant: HI R404A LO 5086.
Made in USA.
Make: Environmental Stress Systems.
Model: MRTPG22211K-001.
Serial Number: 18111902.
Overall Dimensions: Length: 42" Width: 30" Height: 30" .
Electrical: 220V, 1PH, 60Hz, 4400W, 3-wire.
The ESS, Inc. MRTP thermal platform systems utilizes an efficient mechanical refrigeration system that re-circulates the refrigerant in a closed loop system. Only environmentally friendly zero-ozone depleting refrigerants are used. Proprietary design features provide fast ramp rates with efficient heat removal. The system is portable and a single AC outlet is all that is needed to operate it. The system normally uses an air-cooled condenser, which rejects a certain amount of heat into the room. If a water cooling source is available, the system can operate with a water-cooled condenser. If many systems will operate in the same room a water cooling circuit should be considered to remove the heat rejected by the refrigeration cycle.
There are two types of MRTP systems. The first type is called single stage and uses one refrigeration loop to cool the thermal platform. The second type called cascade uses two refrigeration loops in series enabling the temperature of the thermal plate to be as low as -80ºC.
Depending on the use or the space intended for the MRTP, several configurations are available. The Under-Bench configuration is very similar except that the cabinet is wider and not as high so that the it can be operated under a table or work bench while the plate (attached with an umbilical) can be used above. ESS, Inc. offers several Accessories for its MRTP systems. Accessories are available such as a polycarbonate cover, an adapter plate, a hold down clamp, a clam shell dry-box desiccator, a low pressure nitrogen purge kit and a high pressure nitrogen purge kit.
Traditional MRTP Systems
Mechanically refrigerated thermal platform (MRTP) systems eliminate the need for LCO2 or LN2 expendable refrigerants. Thermal platforms offer the fastest, most convenient method of test- ing electronic components that may be heated and cooled by direct conduction. Not only do thermal plates offer much faster thermal cycling rates than environmental chambers, but cable connections, probing and tuning of the device under test is much more easily accomplished. They can be used on the floor with casters or po- sitioned underneath a work table to save floor space.
Underbench Style
Heating of the plate is provided by resistance elements and cooling by a closed-loop recirculat- ing vapor compression mechanical refrigeration system utilizing chlorine-free zero ozone deplet- ing refrigerant.
Several standard sizes insure quick delivery of a plate that is well suited to your test require- ments. Additional standard features include precision grinding and hard plating of plate sur- faces, threaded 18-8 stainless steel 1/4”-20 in- serts for fixturing and a fixed set point, latching thermal overtemperature failsafe system.
Dry boxes utilizing a dry Nitrogen (GN2) or very dry air purge system allow moisture and frost free testing below dew point. Ground & plat- ed fixturing adapter plates and our universal hold down clamping arm are quick & easy ways to at- tach devices to the platform.
Questions?
(Be sure to know Auction Name and Lot Number when you contact us)
Call or Text: Brian: 763-347-1717 or Mike: 612-432-1321
More Helpful Information:
There IS a Forklift Onsite to help with Loading at no charge.
Payments: We prefer to take payments either: from your K-BID.com Dashboard (especially if shipping or having third party pickup.) OR during the removal day in person at our cashier table.
Payment Methods Accepted: Cash, Credit/Debit Card (up to $3,000), Check (Payable to "Surplus Liquidation Auctions"...ID Required), Cashier's Check, and Wire Transfer (Please Call).
| Bid Range | Minimum Increment | ||
|---|---|---|---|
| $0.01 | - | $75.00 | $1.00 |
| $75.01 | - | $150.00 | $5.00 |
| $150.01 | - | $250.00 | $10.00 |
| $250.01 | - | $500.00 | $25.00 |
| $500.01 | - | $1,000.00 | $50.00 |
| $1,000.01 | - | $5,000.00 | $75.00 |
| $5,000.01 | - | $50,000.00 | $100.00 |
| $50,000.01 | - | $75,000.00 | $250.00 |
| $75,000.01 | - | $100,000.00 | $500.00 |
| $100,000.01 | - | $2,500,000.00 | $1,000.00 |
| Hammer Price Tier | Buyer's Premium | Cap | |
|---|---|---|---|
| $0.00 - $4,999.99 | 13.00% | ||
| $5,000.00 - infinity | 10.00% | $1,000.00 | |
This auction is contracted and managed by: Surplus Liquidation Auctions
Manager: Mike Hopper
This auction is contracted and managed by Surplus Liquidation Auction.
Payment Types Accepted: Personal and business check, or credit cards up to $3,000.00. Cash or certified funds up to $10,000.00. Wire Transfer for any invoice over $10,000.00.
This auction is contracted and managed by an independent affiliate. By placing a bid on this auction, you are agreeing to the auction specific terms listed on this page in additions to the K-BID user terms and agreements.
K-BID Online, Inc. (K-BID) is responsible for maintaining the K-BID.com website. K-BID.com serves as the venue used by independent auction companies (Affiliates) to present their online auctions to bidders.
K-BID’s role in the auctions listed on K-BID.com is limited to providing the venue for affiliate auctions. Affiliates are not employees, agents, representatives or partners of K-BID Online, Inc. K-BID’s knowledge about individual auctions and individual auction transactions is limited to the information appearing on the website.
By placing a bid on K-BID.com, bidders are verifying they are at least 18 years old and acknowledging they understand and will comply with both the K-BID.com website terms and the auction specific terms. Bidders MUST NOT share their password or account information with anyone. Bidders are responsible for bids placed on their account.
Inspection dates/times are available for every auction. Bidders are strongly encouraged to inspect prior to placing bids. Removal day is not inspection day. When an auction ends, and the winning bidder invoice appears on the bidder’s dashboard, the bidder is obligated to honor their bid(s).
Every auction item is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.
Bidders are responsible for knowing and complying with auction terms. Failure to comply with removal terms may result in bidding privileges being disabled. Once a bid is placed it cannot be retracted.
Sellers and their agents are prohibited from bidding on their own assets.
Items with a reserve will not be sold unless the reserve price has been met.
At the close of the auction, active items will remain open until no bids have been received for three minutes.
Applicable sales tax will be collected by the affiliate managing the auction.
In the event that bidding rights are terminated due to no-show invoices, bidders MAY be reinstated at the discretion of K-BID only after a penalty fee of 20% of the unpaid invoice(s) and a reinstatement fee of $25.00 has been paid to K-BID and a scanned copy of your driver's license emailed to us. INVOICED ITEMS WILL NOT BE AWARDED. The payment is punitive and meant to deter no-shows. Duplicate bidder accounts will be deactivated when they are determined to exist. If possible and at our discretion, K-BID reserves the right to delete any bid we believe has been placed by a suspect bidder. Any registration that shows up on our fraud detection system may be placed on hold and bids removed until the user is verified. K-BID Online, Inc reserves the right to disallow anybody from bidding on its website. Cases of obvious bidding with no intent to redeem will be referred to appropriate legal authorities.
Affiliates may lower a lot reserve at any time before or after an auction closes. If the reserve is lowered while the auction is in progress, the applicable reserve message will appear below the Next Required Bid information (Reserve Not Met or Reserve Has Been Met); the asset will sell to the high bidder if the lowered reserve amount is met. If the reserve is lowered after the auction closes, the highest bidder at auction close will receive a winning bidder invoice.
Once an auction begins its closing process, outbid notifications will not be sent.
Once a bid is placed it cannot be retracted.
If you need shipping for items please contact 763-347-1717 (Brian) prior to or on removal day. Text is preferable. Please include bidder number and sale.
Thank you for bidding on SLA Auctions!
Online Payments Are Available for this Auction.
| Bidder | Placed | High Bid |
|---|---|---|
|
4608 ^
|
Mar 31 06:43pm
| $1,575.00 |
|
302173
|
Mar 31 06:43pm
| $1,500.00 |
|
4608 ^
|
Mar 31 06:43pm
| $1,275.00 |
|
302173
|
Mar 31 06:43pm
| $1,200.00 |
|
4608 ^
|
Mar 31 06:43pm
| $1,049.00 |
|
302173
|
Mar 31 06:43pm
| $999.00 |
|
4608 ^
|
Mar 31 06:42pm
| $900.00 |
|
302173
|
Mar 31 06:42pm
| $850.00 |
|
4608 ^
|
Mar 31 06:41pm
| $520.00 |
|
302173
|
Mar 31 06:41pm
| $495.00 |
|
4608 ^
|
Mar 31 06:40pm
| $155.00 |
|
302173
|
Mar 31 06:40pm
| $150.00 |
|
4608 ^
|
Mar 31 06:40pm
| $106.99 |
|
302173
|
Mar 31 06:40pm
| $101.99 |
|
4608 ^
|
Mar 31 05:47pm
| $53.74 |
|
43660
|
Mar 31 05:47pm
| $52.74 |
|
4608 ^
|
Mar 31 05:46pm
| $40.88 |
|
152071
|
Mar 31 05:46pm
| $39.88 |
|
4608
|
Mar 31 04:01pm
| $38.50 |
|
43660
|
Mar 30 06:50pm
| $26.00 |
|
243953
|
Mar 29 09:02am
| $6.00 |
|
282309
|
Mar 20 03:18pm
| $5.00 |