Big Lake, MN
84044 - Medtronic Performer CPB Surgical Bypass Heart Lung 4 Blood Pump Perfusion System
Date of Manufacture 01/2008
The Medtronic Performer CPB System hereafter referred to as the Performer CPB is an electromechanical extracorporeal support device used during cardiopulmonary bypass procedures. It is an integrated console that can provide total circulatory support of the cardiopulmonary system using the Medtronic Bio-Pump Centrifugal Blood Pump.
Temperature monitoring using YSI Series 400 probes for 8 temperatures.
Flow monitoring for the arterial line using a reusable Transonic ultrasonic flow probe.
Oxygen saturation and hematocrit monitoring using an opto-electric sensor.
Timers for the pump time, clamp time, and cardioplegia delivery times and intervals.
Air Bubble Detection (ABD) of macro-air in the arterial circuit.
Air Bubble Detection (ABD) of macro-air in the cardioplegia circuit.
Active Air Removal (AAR) technology.
Level detection utilizes a pair of level sensors to monitor changes in fluid or blood volume in the reservoirs.
12.1 In color touch screen display.
Medtronic Performer CPB Specifications
Physical
Width: 19.6 In (50 cm)
Depth: 22 In (56cm)
Height: 39.4 In (100 cm) - 55.1 In (140 cm)
Weight: Approx. 198 lbs (90 kg)
Environmental
Operating Conditions
Temperature: 50? - 104? (10? - 40?)
Humidity: 30% - 75% Non-condensing Relative Humidity
Atmospheric Pressure: 700 -1060 mBar
Transport and Storage Conditions
Temperature: -4? - 140? (-20? - 60?)
Humidity: 10% - 90% Non-condensing Relative Humidity
Atmospheric Pressure: 700 - 1060 mBar
Electrical Data
Classification (as for EN60601-1): Class I, type BF
Operation Mode: Continuous
Voltage: 100 to 240 VAC ± 10%
Frequency: 50 to 60 Hz ± 10%
Current: max. 6 A (100 to 120V); max. 3 A (220 to 240V)
Power Absorption: max. 600 VA
Earth Leakage Current: < 300 ?A
Patient Leakage Current: < 100 ?A
Ingress Protection(IP code as for IEC 60529): IP 21: protected against solid foreign objects of 12 mm diameter and greater; protected against drop water.
Pump PM1
Unidirectional peristaltic pump with manual operating system
Flows: Up to 3.7 L/min (9.5 mm (3/8 in) pump segment); Up to 3.7 L/min (6.4 mm (1/4 in) and 6.4 mm (1/4 in) pump segments); Up to 1.8 L/min (6.4 mm (1/4 in) pump segment)
Maximum tolerance: ± 10%
Pressure Range Within Tolerance: -150 to +500 mm Hg
Protection system: Feedback with rotation signal detected on the encoder; Open-cover sensor (and subsequent pump blockage).
Pump PM2
Unidirectional peristaltic pump with manual operating system
Flows: Up to 1.5 L/min (9.5 mm (3/8 in) pump segment); Up to 1.5 L/min (6.4 mm (1/4 in) and 6.4 mm (1/4 in) pump segments); Up to 0.8 L/min (6.4 mm (1/4 in) pump segment)
Maximum tolerance: ± 10%
Pressure Range Within Tolerance: -150 to +500 mm Hg
Protection system: Feedback with rotation signal detected on the encoder; Open-cover sensor (and subsequent pump blockage).
Pump PM3
Unidirectional peristaltic pump with manual operating system
Flows: Up to 0.6 L/min (6.4 mm (1/4 in) pump segment); Up to 0.16 L/min (3.2 mm (1/8 in) pump segment)
Maximum tolerance: ± 10%
Pressure Range Within Tolerance: -150 to +500 mm Hg
Protection system: Feedback with rotation signal detected on the encoder; Open-cover sensor (and subsequent pump blockage).
Pump PM4
Unidirectional peristaltic pump with manual operating system
Flows: Up to 1.1 L/min (6.4 mm (1/4 in) and 6.4 mm (1/4 in) pump segments); Up to 0.7 L/min (6.4 mm (1/4 in) and 3.2 mm (1/8 in) pump segments); Up to 0.6 L/min (6.4 mm (1/4 in) pump segment)
Maximum tolerance: ± 10%
Pressure Range Within Tolerance: -150 to +500 mm Hg
Protection system: Feedback with rotation signal detected on the encoder; Open-cover sensor (and subsequent pump blockage).
Auction Details:
All items in this auction are used unless noted as "NEW"
Pick ups are by appointment only. Some of the items on the auctions may require additional equipment or help to load the items into your vehicle / trailer. Please plan these arrangements accordingly.
If attendence on removal date is not possible for you, please plan on having someone pick up the item(s) on your behalf.
Scientific Equipment Liquidators, and K-Bid assume no responsibility for loading or any damages that may occur during the removal process.
Pick Up Location:
Scientific Equipment Liquidators
20017 172nd St NW
Big Lake, MN 55309
763-263-5130
Shipping Information:
No international shipping
Some of the items may be eligable for shipment. Please ask prior to bidding if shipping is available on the item(s) and for a shipping quote. The buyer will be responsible for all shipping and handling costs that is done by Scientific Equipment Liquidators.
We use UPS Ground for small to medium items, and CRST STI blanket wrapped, air-ride van lines for oversized items.
If a large item needs to be palletized, there will be a $100 fee per pallet.
We will not warranty ittems if buyer does not follow our shipping recommendations listed above. Calibrated or sensitive electronic equipment should be sent "air ride, blanket wrapped" and should not be sent straight freight if it is too large for UPS Ground limits.
| Bid Range | Minimum Increment | ||
|---|---|---|---|
| $0.01 | - | $75.00 | $1.00 |
| $75.01 | - | $150.00 | $5.00 |
| $150.01 | - | $250.00 | $10.00 |
| $250.01 | - | $500.00 | $25.00 |
| $500.01 | - | $1,000.00 | $50.00 |
| $1,000.01 | - | $5,000.00 | $75.00 |
| $5,000.01 | - | $50,000.00 | $100.00 |
| $50,000.01 | - | $75,000.00 | $250.00 |
| $75,000.01 | - | $100,000.00 | $500.00 |
| $100,000.01 | - | $2,500,000.00 | $1,000.00 |
| Buyer's Premium | Cap | ||
|---|---|---|---|
| 15.00% | $1,500.00 | ||
This auction is contracted and managed by: Scientific Equipment Liquidators
Manager: Gideon Collins
This auction is contracted and managed by: Scientific Equipment Liquidators
The affiliate accepts credit card, cash, and cashier's check. Personal checks are not accepted.
By placing a bid on this auction, you are agreeing to the auction specific terms in addition to K-BID user terms. For auctions contracted and managed by an independant affiliate, K-BID online, Inc is acting as a venue only and will not be involved in any disputes or issues regarding this auction.
We will hold the items for 3 days after the final bid is made. A $10 per item, per day fee will be required after that.
Auction Details:
All items in this auction are used unless noted as "NEW"
Pick ups are by appointment only. Some of the items on the auctions may require additional equipment or help to load the items into your vehicle / trailer. Please plan these arrangements accordingly.
If attendence on removal date is not possible for you, please plan on having someone pick up the item(s) on your behalf.
Scientific Equipment Liquidators, and K-Bid assume no responsibility for loading or any damages that may occur during the removal process.
Pick Up Location:
Scientific Equipment Liquidators
20017 172nd St NW
Big Lake, MN 55309
Shipping Information:
No international shipping
Some of the items may be eligable for shipment. Please ask prior to bidding if shipping is available on the item(s) and for a shipping quote. The buyer will be responsible for all shipping and handling costs that is done by Scientific Equipment Liquidators.
We use UPS Ground for small to medium items, and CRST STI blanket wrapped, air-ride van lines for oversized items.
If a large item needs to be palletized, there will be a $100 fee per pallet.
We will not warranty ittems if buyer does not follow our shipping recommendations listed above. Calibrated or sensitive electronic equipment should be sent "air ride, blanket wrapped" and should not be sent straight freight if it is too large for UPS Ground limits.
Auction Terms Addendum
This auction is contracted and managed by an independent affiliate. By placing a bid, you agree to both the auction-specific terms listed on this page and the K-BID User Terms and Agreements.
Platform Role
K-BID Online, Inc. (“K-BID”) operates and maintains K-BID.com as a venue for independent auction companies (“Affiliates”) to conduct online auctions.
Affiliates are independent entities and are not employees, agents, or representatives of K-BID. K-BID’s knowledge of individual auctions is limited to the information provided on the website.
Bidder Responsibilities
By placing a bid, you confirm that you are at least 18 years old and agree to comply with all applicable terms.
Inspection & Removal
Inspection dates and times are provided for every auction. Bidders are strongly encouraged to inspect items prior to bidding.
Removal day is not an inspection day.
Once an auction closes and an invoice is issued, the winning bidder is obligated to complete the purchase.
Item Condition
All items are sold “as is, where is,” with no guarantees or warranties. Buyers are responsible for their own due diligence.
Buyer’s Premium
If applicable, Buyer’s Premium caps are applied per item, not per invoice.
Auction Process
Compliance & Enforcement
Failure to comply with auction terms, including removal requirements, may result in suspension of bidding privileges.
If bidding privileges are suspended due to unpaid invoices:
Duplicate accounts will be deactivated. Suspected fraudulent activity may result in bid removal, account holds, or permanent suspension. K-BID reserves the right to refuse service to any user and may refer fraudulent behavior to appropriate authorities.
Seller Conduct
Sellers and their agents are strictly prohibited from bidding on their own items.
Sales Tax
Applicable sales tax will be collected by the affiliate managing the auction.
Shipping Information:
No international shipping
Some of the items may be eligable for shipment. Please ask prior to bidding if shipping is available on the item(s) and for a shipping quote. The buyer will be responsible for all shipping and handling costs that is done by Scientific Equipment Liquidators.
We use UPS Ground for small to medium items, and CRST STI blanket wrapped, air-ride van lines for oversized items.
If a large item needs to be palletized, there will be a $100 fee per pallet.
We will not warranty ittems if buyer does not follow our shipping recommendations listed above. Calibrated or sensitive electronic equipment should be sent "air ride, blanket wrapped" and should not be sent straight freight if it is too large for UPS Ground limits.
This affiliate accepts credit card, cash, cashier's check. Payment must be made prior to picking up equipment. If paying in cash, please bring exact change. No personal checks will be accepted.
Pick ups are by appointment only. Some of the items on the auctions may require additional equipment or help to load the items into your vehicle / trailer. Please plan these arrangements accordingly.
If attendence on removal date is not possible for you, please plan on having someone pick up the item(s) on your behalf.
Scientific Equipment Liquidators, and K-Bid assume no responsibility for loading or any damages that may occur during the removal process.
Pick Up Location:
Scientific Equipment Liquidators
20017 172nd St NW
Big Lake, MN 55309
763-263-5130
| Bidder | Placed | High Bid |
|---|
