27.9 oz. Epcon Acrylic 7 Anchoring System-4 Tubes
Lot #26
Item: 48ae-1340021

Plymouth, MN

This Lot is:

Closed

Mon, Feb 20, 2017 10:09pm CST

High Bidder: #232284

Current Bid:

$7.00

Next Required Bid: $8.00

Shipping: Yes
Online Payment: Yes
Location / Contact:
2530 Xenium Lane North, Plymouth, MN 55441
Phone: 763-383-5126

Lot Description:

Fastenal SKU#0123109

Application:Use with screens in hollow block and brick for pre-drilled holesCA Prop65:YColor:GrayContainer Size:28 ozContainer Type:Dual CartridgeCuring Time:35 minDiscontinued:YSeries:A7Specification:ASTM C881-02Style:Adhesive AnchorTemperature:60°FType:EpoxyVending Certified:YWorking Time:7 min Product Weight: 13.24 lbs. Applications:
  1. Drill 1/16" oversize diameter holes for 1/4"?1/2" diameter threaded rods and #3 rebar. Drill 1/8" oversize diameter holes for 5/8"?1-1/4" diameter threaded rods, #4 rebar, grout filled blocks and brick pinning. Clean out hole from bottom with forced air. Complete hole preparation with brush and repeat cleaning with forced air (leave no dust or slurry).
  2. When starting new cartridge or new nozzle, dispense and discard enough adhesive until uniform grey color is achieved. Insert the nozzle into the bottom of the hole and fill to 1/2 the hole depth.
  3. Insert rod slowly by hand into the bottom of the hole with a slow twisting motion. This insures adhesive fills voids and crevices and uniformly coats the anchor rod.
  4. See table for working times and curring times. After the suggested cure time is met, install and tighten fixture into place.
Notes: The acrylic resin and hardening agent are completely mixed as they are simultaneously dispensed from the dual cartridge through a static mixing nozzle, directly into the anchor hole. A7 can be used with threaded rod or rebar.
  • All weather formula
  • No drip, no sag, easy clean up
  • Fast and easy dispensing, even 28-oz. cartridge can be hand dispensed
  • Fast curing time, 35 minutes at 60°F
  • Not mix ratio sensitive for maximum consistency
  • Rods are easier to insert into the hole with A7 compared with other adhesives
  • Works in damp holes and underwater applications
  • Requires less adhesive ? can be used in 1/16" oversized or 1/8" oversized holes
  • One formula for both hollow and solid base materials
  • NSF 61 listed

    INSPECTIONS-Inspections can be done for the duration of each auction during the business hours of 8am-2pm, MON-FRI. Requests for inspections outside of this timeframe must be emailed and approved prior to your arrival.

    PICKUPS-All pickup timeframes are listed for each auction. Requests for special pickup arrangements must be emailed and approved. PAYMENT MUST STILL BE MADE WITHIN THE ORIGINAL REMOVAL TIMEFRAME. Any lots not paid for AND picked up will be considered a no show and your bidder number will be reported to K-Bid for further action.

    LOADING-We can assist with loading via forklift. You must bring proper equipment(Trailers, Tie Downs, etc.). Any loading we do via forklift will be at our discretion.

    Inspection

    Auction Closing:

    Mon, Feb 20, 2017
    10:00 pm

    Removal:


    Bidding Increments:

    Bid Range Minimum Increment
    $0.01 - $75.00 $1.00
    $75.01 - $150.00 $5.00
    $150.01 - $250.00 $10.00
    $250.01 - $500.00 $25.00
    $500.01 - $1,000.00 $50.00
    $1,000.01 - $5,000.00 $75.00
    $5,000.01 - $50,000.00 $100.00
    $50,000.01 - $75,000.00 $250.00
    $75,000.01 - $100,000.00 $500.00
    $100,000.01 - $2,500,000.00 $1,000.00

    Discounted Buyer's PremiumRegular Buyer's PremiumCap
    10.00% 13.00%$3,250.00


    This auction is contracted and managed by: Fastenal Clearance Outlet

    Manager: Marc Sanders


    This auction is contracted and managed by Fastenal Clearance Outlet. 

    This affiliate accepts payment types:  Cash or Credit Card ONLY. No account charges or checks accepted under any circumstances

    By placing a bid on this auction you are agreeing to the auction specific terms listed below in addition to K-BID user terms.  For auctions contracted and managed by an Independent Affiliate, K-BID Online, Inc. is acting as a venue only and will not be involved in any disputes or issues regarding this auction.

    Everything is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.

    There is a 13% BUYERS PREMIUM (13% BP) on this auction. All NON-Credit/Debit Card payments MADE IN-FULL (invoiced amount) will receive a 3% Reduction in BUYERS PREMIUM (10% BP).

    Applicable Minnesota Sales Tax will be collected.

    At the close of the auction active items will remain open until no bids have been received for three minutes.

    IMPORTANT NOTE: If the high bidder of an item does NOT acknowledge the purchase, K-BID systems reserves the right to determine how and to whom it will be resold. If we determine that the winning bid was not a bona fide bidder, the item WILL NOT AUTOMATICALLY go to the next second-highest bid.


    This auction is contracted and managed by an independent affiliate. By placing a bid on this auction, you are agreeing to the auction specific terms listed on this page in additions to the K-BID user terms and agreements.  

    K-BID Online, Inc. (K-BID) is responsible for maintaining the K-BID.com website.  K-BID.com serves as the venue used by independent auction companies (Affiliates) to present their online auctions to bidders.  

    K-BID’s role in the auctions listed on K-BID.com is limited to providing the venue for affiliate auctions. Affiliates are not employees, agents, representatives or partners of K-BID Online, Inc. K-BID’s knowledge about individual auctions and individual auction transactions is limited to the information appearing on the website.

    By placing a bid on K-BID.com, bidders are verifying they are at least 18 years old and acknowledging they understand and will comply with both the K-BID.com website terms and the auction specific terms. Bidders MUST NOT share their password or account information with anyone. Bidders are responsible for bids placed on their account.

    Inspection dates/times are available for every auction. Bidders are strongly encouraged to inspect prior to placing bids. Removal day is not inspection day. When an auction ends, and the winning bidder invoice appears on the bidder’s dashboard, the bidder is obligated to honor their bid(s).

    Every auction item is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.

    Bidders are responsible for knowing and complying with auction terms. Failure to comply with removal terms may result in bidding privileges being disabled.  Once a bid is placed it cannot be retracted.

    Sellers and their agents are prohibited from bidding on their own assets.

    Items with a reserve will not be sold unless the reserve price has been met.

    At the close of the auction, active items will remain open until no bids have been received for three minutes.

    Applicable sales tax will be collected by the affiliate managing the auction.  

    In the event that bidding rights are terminated due to no-show invoices, bidders MAY be reinstated at the discretion of K-BID only after a penalty fee of 20% of the unpaid invoice(s) and a reinstatement fee of $25.00 has been paid to K-BID and a scanned copy of your driver's license emailed to us. INVOICED ITEMS WILL NOT BE AWARDED. The payment is punitive and meant to deter no-shows. Duplicate bidder accounts will be deactivated when they are determined to exist. If possible and at our discretion, K-BID reserves the right to delete any bid we believe has been placed by a suspect bidder. Any registration that shows up on our fraud detection system may be placed on hold and bids removed until the user is verified. K-BID Online, Inc reserves the right to disallow anybody from bidding on its website. Cases of obvious bidding with no intent to redeem will be referred to appropriate legal authorities.

    Affiliates may lower a lot reserve at any time before or after an auction closes.  If the reserve is lowered while the auction is in progress, the applicable reserve message will appear below the Next Required Bid information (Reserve Not Met or Reserve Has Been Met); the asset will sell to the high bidder if the lowered reserve amount is met. If the reserve is lowered after the auction closes, the highest bidder at auction close will receive a winning bidder invoice. 

    Once an auction begins its closing process, outbid notifications will not be sent.

    Once a bid is placed it cannot be retracted.

     



    2530 Xenium Lane North
    Plymouth
    MN, 55441


    Phone: 763-383-5126

    Pickup is always the preferred method. Fastenal does has different shipping options available but arrangements must be made prior to auction close. Please email requests prior to bidding to xx004@stores.fasenal.com. Larger items could be shipped via our Fastenal 3PL to THE CLOSEST FASTENAL BRANCH ONLY. Items eligible for this will be specified in the description. You can get a quote by going to www.fastenal.com and find the Third Party Logistics(3PL) link under resources. All items shipped must be paid for prior to shipping.

    Bid History

    2 Bid(s)
    Bidder Placed High Bid
    232284
    Feb 20 10:08pm
    $7.00
    208978
    Feb 20 06:29pm
    $5.00