Surplus Auction December 2019

Fram Fram

Fram Fram

Auction Location: 2830 Fairview Ave North, Roseville, MN 55113

Phone: 612-564-3726

Lot Categories: Metal Fabrication (277)

Auction Closed
12/04/2019 06:00 pm

Closed



Filtered Results From This Auction:

Showing 1 to 50 of 281 items

Current Bid: $7,500.00
Next Required Bid: $7,600.00
High Bidder: #182445
Began Closing:
Wednesday 12/04/2019
06:00 pm CDT

Lot is Closed

New 2017 Ingersoll Rand Contact-Cooled Rotary Air Screw Compressor Model:UP6-15ctas-125W/D, 15HP, 200V, 3 Phase, 125 Gal Horizontal Receiving Tank, 60Hz, 125 Max PSI, 6250 Pump Speed, S/N: CBV532952, Overall Dims 54"x29"61" 210 hours.

This item can be loaded for $75. 
Commercial & Industrial > Metal Fabrication



No Image Available

Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: #98118
Began Closing:
Wednesday 12/04/2019
06:00 pm CDT

Lot is Closed

Current Bid: $1,526.00
Next Required Bid: $1,601.00
High Bidder: #322508
Began Closing:
Wednesday 12/04/2019
06:00 pm CDT

Lot is Closed

Bridgeport 1J Vertical Milling Machine, 9" x 42" T-Slotted Table, 24" X-Travel, 12" Y-Travel, 16" Knee Travel, 5" Quill Travel, R-8 Spindle Taper, 80-2720  RPM, One Shot Lube, 6" Precision Machine Vise With Swivel Plate, S/N:159229, Approx. 60" x 64" x 86", Approx. 2,500 lbs.

This item can be loaded for $75
Commercial & Industrial > Metal Fabrication
Current Bid: $6,600.00
Next Required Bid: $6,700.00
High Bidder: #160155
Began Closing:
Wednesday 12/04/2019
06:01 pm CDT

Lot is Closed

Caterpillar Model: V50DSA LP Powered Forklift, 5,000 lb Rated Capacity, Side Shift, 42" Forks, 80" Mast Height, Tilt, SGL Solid Pnuematic Tires, S/N:2NC01370, LP Tank Not Included.

Forklift Not Available To Pick Up Until The Final Day of Checkout At The End of The Day
Commercial & Industrial > Metal Fabrication
Current Bid: $375.00
Next Required Bid: $400.00
High Bidder: #160155
Began Closing:
Wednesday 12/04/2019
06:01 pm CDT

Lot is Closed

Miller Millermatic 130 CV-DC Welding Power Source/ Wire Feeder, 115V, 1 Phase, 90 Amps, 20% Duty Cycle, Max OCV 30, Amp Range 30-130, kw 2.52, s/n: KH453796
Commercial & Industrial > Metal Fabrication
Current Bid: $988.00
Next Required Bid: $1,038.00
High Bidder: #110812
Began Closing:
Wednesday 12/04/2019
06:01 pm CDT

Lot is Closed

Millermatic 185 Wire Feed Welder, Serial Number KJ185306, New in 1998, W/ Smaller size Argon Tank Currently Empty, Millermatic 185 CV. DC. Wire Feed Welding Power SourceComes With:1. Mild Steel/Stainless Steel Gun, 1. Aluminum Gun, 220 Single Phase Unit. No title included with tank, invoice only.

This item can be loaded for $25
 
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Began Closing:
Wednesday 12/04/2019
06:02 pm CDT

Lot is Closed

Preview & Removal Locations:

Scheduled days at 2830 Fairview Ave North, Roseville, MN 55113
By appointment at 9151 International Pkwy, New Hope, MN 55428
 
Commercial & Industrial > Metal Fabrication
Current Bid: $1,425.00
Next Required Bid: $1,500.00
High Bidder: #246615
Began Closing:
Wednesday 12/04/2019
06:02 pm CDT

Lot is Closed

Qty (8) Wilson Tool High Precision Lower Press Brake Dies 36" (3) 50091LD, 90 Degrees, Offset .500, Max. Load: 30 Tons/ft (2) 5091S, V-Opening, 18" (3) 50091LP, 36"
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Began Closing:
Wednesday 12/04/2019
06:02 pm CDT

Lot is Closed

Live Preview at 2830 Fairview Ave N, Roseville, MN 55113
Saturday, November 30th, 10am - 3pm
Tuesday, December 3rd, 9am - 4pm 
 
Commercial & Industrial > Metal Fabrication
Current Bid: $151.99
Next Required Bid: $161.99
High Bidder: #108295
Began Closing:
Wednesday 12/04/2019
06:03 pm CDT

Lot is Closed

TELEDYNE PEER Model: AR-450 Spot Welder, 220V, 50 KVA, SEC.VOLTS: 3.4, Frequency: 60Hz @ 50% Duty Cycle, 34" Throat, WT-100 Control, CAT No. W140480000, Type:W1, 480 VAC, Dual Foot Pedals Weld-Retract, OHMITE Welding Current Control 1-8, Air Regulator With Lubrication, S/N: 800067,

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Began Closing:
Wednesday 12/04/2019
06:03 pm CDT

Lot is Closed

Removal Schedule at 2830 Fairview Ave N, Roseville, MN 55113
Thursday, December 5th, 9am-4pm
Friday, December 6th, 9am-4pm
Saturday, December 7th, 8am-1pm
ALL PAYMENTS DUE BY SATURDAY December 7th

**We will have an operator to help load Thursday-Saturday AT YOUR COST. Please bring help necessary to load your items.
Questions on load out please call us at (612) 564-3726 or email us at info@framfram.com
Commercial & Industrial > Metal Fabrication
Current Bid: $415.00
Next Required Bid: $440.00
High Bidder: #312795
Began Closing:
Wednesday 12/04/2019
06:03 pm CDT

Lot is Closed

New Square Tube, 1" Square, 18 Gauge, 144 inch Length,
156186A, (216) Pieces In Bundle.

Location: New Hope, MN
Removal By Appointment Only
Commercial & Industrial > Metal Fabrication
Current Bid: $675.00
Next Required Bid: $725.00
High Bidder: #119859
Began Closing:
Wednesday 12/04/2019
06:04 pm CDT

Lot is Closed

DURO DYNE Model: TBW Spot Welder Primary Voltage 220, Cycles 50-60, 25 Amp, 5.0 KVA 7 1/2 % Duty Cycle, 2.0 KVA @ 50% Duty Cycle, S/N: 40882
Commercial & Industrial > Metal Fabrication
Current Bid: $1,310.00
Next Required Bid: $1,385.00
High Bidder: #322515
Began Closing:
Wednesday 12/04/2019
06:04 pm CDT

Lot is Closed

Lockformer Roll Former Pittsburgh 18 Gauge, 1 1/8", S/N:424

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $325.00
Next Required Bid: $350.00
High Bidder: #110812
Began Closing:
Wednesday 12/04/2019
06:04 pm CDT

Lot is Closed

Flammable Storage Cabinet 65" x 43" x 18" 

This item can be loaded for $20
Commercial & Industrial > Metal Fabrication
Current Bid: $350.00
Next Required Bid: $375.00
High Bidder: #110812
Began Closing:
Wednesday 12/04/2019
06:05 pm CDT

Lot is Closed

Edsal Model:SC22F-P Flammable Storage Cabinet on Stand, Edsal Mfg Co. Cabinet 23" x 35" x 35", W/Key, Custom Stand, NFPA Code 30 FM Approved, Contents Not Included

This item can be loaded for $20
Commercial & Industrial > Metal Fabrication
Current Bid: $750.00
Next Required Bid: $800.00
High Bidder: #118759
Began Closing:
Wednesday 12/04/2019
06:05 pm CDT

Lot is Closed

Well Equipped L-tec Welder, L-tec Tig/Stick Welder H-250 HF, Model H-250 HF, Serial # B88K-79362, 1 Phase, Volts:208/230/460, Amps: 110/100/50, Pulse High Frequency: Start and Continuous, AC/DCSP/DCRP, Panel and Remote Operation, Post Flow Gas, High and Low Amps, Current Control: Panel or Foot Pedal, Ground, Large Argon Tank w/ 2500 PSI, 2 Stage Regulator for purging, Weldcraft Torch, Stick Weld Cables and Stinger, On Casters. No title included with tank, invoice only.

This item can be loaded for $25
 
Commercial & Industrial > Metal Fabrication
Current Bid: $1,575.00
Next Required Bid: $1,650.00
High Bidder: #129029
Began Closing:
Wednesday 12/04/2019
06:05 pm CDT

Lot is Closed

Heavy Duty Cantilever Racking 12 foot Uprights With (12) Adjustable 5 foot Arms, Bolted Construction. 5 foot Between Arms
Commercial & Industrial > Metal Fabrication
Current Bid: $325.00
Next Required Bid: $350.00
High Bidder: #297125
Began Closing:
Wednesday 12/04/2019
06:06 pm CDT

Lot is Closed

Miller CP-300 Constant Voltage DC Arc Welder , Millermatic S-52E Wire Feeder, 3 Phase, 12.3 KW, 60Hz, 260/230/460 Volts, Rated Output: 32Volts, 300 Amperes, Max OCV 44, 100% Duty Cycle, 16.5 Amp, S/N: JJ476831

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $3,575.00
Next Required Bid: $3,650.00
High Bidder: #39093
Began Closing:
Wednesday 12/04/2019
06:06 pm CDT

Lot is Closed

1997 Hercules SPM-630x4000 Gap Bed Engine Lathe 25/35 x 157" 1250 RPM Loaded DRO, Swing: 25", Gap Swing: 35", Centers: 157", Spindle Bore: 4.1", RPM: 31.5-1250, Height of centers: 12", Cross slide stroke: 13", Swing over cross slide: 16", Inch & Metric Threading, Taper Attachment, 5MT Tailstock, Aloris DA Tool Post with Holders, 15" & 16" 3-Jaw Chucks, 25" 4-Jaw Chuck, (2) Bull Nose Centers, 5MT Royal Live Center, (2) Steady Rests, Assorted Tooling, 2-Axis Sony DRO, Serial Number 1997464

This can be loaded for $500

Location: New Hope, MN 55428, Appointment Needed For Pick Up

Commercial & Industrial > Metal Fabrication
Current Bid: $760.00
Next Required Bid: $810.00
High Bidder: #129029
Began Closing:
Wednesday 12/04/2019
06:06 pm CDT

Lot is Closed

EZ-GO Electric Golf Cart w/Utility Cargo Box w/Lester-Matic Charger. Tested Runs & Drives. (2) Extra Tires, 6 Deep Cycle Batteries, Head Lights.
Commercial & Industrial > Metal Fabrication
Current Bid: $875.00
Next Required Bid: $925.00
High Bidder: #129029
Began Closing:
Wednesday 12/04/2019
06:07 pm CDT

Lot is Closed

New SPG Cantilever Racks Model: Button On, Capacity: Single Column 12,000 lbs. Double Column 24,000 Lbs., Dimensions: 152" x 27" x 84"H, 16 Arms

Location: New Hope, MN 55428, Appointment Needed For Pick Up
Commercial & Industrial > Metal Fabrication
Current Bid: $601.00
Next Required Bid: $651.00
High Bidder: #89187
Began Closing:
Wednesday 12/04/2019
06:07 pm CDT

Lot is Closed

Miller Model: 330A/BP Constant Current AC/DC ARC Welder, ITW Cooler, Output AC: 32V, 300 Amperes, 60% Duty Cycle, 80 Max OCV, Output DC: 32V, 300 Amperes, 60% Duty Cycle, Max OCV 72, 12 KW, 60Hz, 1 Phase, Foot Pedal, S/N: JF934682

This item can be loaded for $25

 
Commercial & Industrial > Metal Fabrication
Current Bid: $1,650.00
Next Required Bid: $1,725.00
High Bidder: #133395
Began Closing:
Wednesday 12/04/2019
06:07 pm CDT

Lot is Closed

1995 Wabash ST 28' Dry Van Trailer, Tandem Rear, Custom Attached Shelving, Tandem Wheel Rim is Repaired & Needs to Be Put Back On. VIN: 1JJV28185SL257629

DOT Current With Clear & Free Title 
Commercial & Industrial > Metal Fabrication
Current Bid: $1,425.00
Next Required Bid: $1,500.00
High Bidder: #297125
Began Closing:
Wednesday 12/04/2019
06:08 pm CDT

Lot is Closed

165 in x55 in Conference Table w/12 Rolling Conference Chairs, (4) Removable Sections, Contents Not Included
Commercial & Industrial > Metal Fabrication
Current Bid: $1,475.00
Next Required Bid: $1,550.00
High Bidder: #322455
Began Closing:
Wednesday 12/04/2019
06:08 pm CDT

Lot is Closed

Bridgeport Vertical Milling Machine, 9" x 42" T-Slotted Table, 24" X-Travel, 12" Y-Travel, 16" Knee Travel, 5" Quill Travel, R-8 Spindle Taper, 80-2720 RPM, S/N:61298, Approx. 60" x 64" x 86", Approx. 2,500 lbs. Powerfeed NOT Functional

This item can be loaded for $75
Commercial & Industrial > Metal Fabrication
Current Bid: $905.00
Next Required Bid: $955.00
High Bidder: #228444
Began Closing:
Wednesday 12/04/2019
06:08 pm CDT

Lot is Closed

Taylor-Dunn Commercial Electric Utility Vehicle Tow Tractor Model: C0-425-48, 48V, Draw Bar Pull Normal: 300 lb, 1336 N, Ultimate: 2000 lb, 8900 N, s/n: 18687 Mfg 2012
(Condition Unknown)
Location: New Hope, MN 55428, Appointment Needed For Pick Up
Commercial & Industrial > Metal Fabrication
Current Bid: $575.00
Next Required Bid: $625.00
High Bidder: #274457
Began Closing:
Wednesday 12/04/2019
06:09 pm CDT

Lot is Closed

Hypertherm HD3070 HyPerformance Plasma Cutting System Power Source, ArcGlide INTFC, P/N: 090052, Shape Cutting System, 480V, S/N:3070, 505966,

This item can be loaded for $20
Commercial & Industrial > Metal Fabrication
Current Bid: $750.00
Next Required Bid: $800.00
High Bidder: #110812
Began Closing:
Wednesday 12/04/2019
06:09 pm CDT

Lot is Closed

Custom Made 14 foot x 6 foot Heavy Duty Utility Trailer, Single Axle, 12,500 lb Indicated Capacity, 2 5/16 inch Ball Hitch, 1,800 lb Tongue Weight, Bulldog Adj. Height Crank, Wood Decking, Steel Fabricated,  *NO TITLE*
Commercial & Industrial > Metal Fabrication
Current Bid: $56.00
Next Required Bid: $57.00
High Bidder: #322345
Began Closing:
Wednesday 12/04/2019
06:09 pm CDT

Lot is Closed

Heavy Duty Rolling scrap Hopper 67" x30" x38"
Commercial & Industrial > Metal Fabrication
Current Bid: $92.99
Next Required Bid: $97.99
High Bidder: #227857
Began Closing:
Wednesday 12/04/2019
06:10 pm CDT

Lot is Closed

PEER ACE Spot Welder Model:102, KVA 20, 230V, 24" Throat, 2 PCS. 12 Ga Steel, 60 Cycle, S/N: 7171, PEER WELD Timer Model:47, Hose Reel

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $115.00
Next Required Bid: $120.00
High Bidder: #182292
Began Closing:
Wednesday 12/04/2019
06:10 pm CDT

Lot is Closed

Case Backhoe Bucket Attachment 48 in x 12 in, 8 in Between Front Pins, 4 in Between Back Pins, 16 in Max Depth

This item can be loaded for $20
Commercial & Industrial > Metal Fabrication
Current Bid: $41.00
Next Required Bid: $42.00
High Bidder: #321198
Began Closing:
Wednesday 12/04/2019
06:10 pm CDT

Lot is Closed

Bett Marr Co 24" Vertical Band saw, Approx. 6" Max Under Blade Guide, 48" x 48" Table, 3-Phase Motor, s/n: NA, Approx. 60" x 48" x 60"

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $1,350.00
Next Required Bid: $1,425.00
High Bidder: #321507
Began Closing:
Wednesday 12/04/2019
06:11 pm CDT

Lot is Closed

Engel Rollformer Complete w/Male & Female 20-26 Ga Buttonlock Rolls, (S) Slips, 220V, 1 Phase

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $115.00
Next Required Bid: $120.00
High Bidder: #297125
Began Closing:
Wednesday 12/04/2019
06:11 pm CDT

Lot is Closed

RAACO Index (55) Drawer Parts Bin Cabinet With Assorted MOSTLY CARBIDE End Mills Sizes 1/32" - 1/2" Some Drawers Empty Please Inspect Photos
Commercial & Industrial > Metal Fabrication
Current Bid: $1,050.00
Next Required Bid: $1,125.00
High Bidder: #316841
Began Closing:
Wednesday 12/04/2019
06:11 pm CDT

Lot is Closed

Scaffolding Set Including (4) 7 ft Standard Uprights With (8) Adj. Legs, Feet & Base, (32) Approx 75 in x 19 in Aluminium Decks w/Transoms, (6) Tube Side Outrigger Brackets, (7) Sway Bracing Supports. 
Commercial & Industrial > Metal Fabrication
Current Bid: $260.00
Next Required Bid: $285.00
High Bidder: #322510
Began Closing:
Wednesday 12/04/2019
06:12 pm CDT

Lot is Closed

Steel shelving and contents of assorted copper and brass pipe fitting and valves shelf approximate 12" x 36" x 75"
Commercial & Industrial > Metal Fabrication
Current Bid: $260.00
Next Required Bid: $285.00
High Bidder: #322510
Began Closing:
Wednesday 12/04/2019
06:12 pm CDT

Lot is Closed

Steel shelving and contents of assorted copper and Lenox brazing tool, shelf approximate 12" x 36" x 75"
Commercial & Industrial > Metal Fabrication
Current Bid: $32.00
Next Required Bid: $33.00
High Bidder: #56330
Began Closing:
Wednesday 12/04/2019
06:12 pm CDT

Lot is Closed

Assorted Morse Taper Adapters MT#3,4 & 5
Commercial & Industrial > Metal Fabrication
Current Bid: $110.00
Next Required Bid: $115.00
High Bidder: #322071
Began Closing:
Wednesday 12/04/2019
06:13 pm CDT

Lot is Closed

Engel Rollformer Model: SF-6 5M3, S/N:19662

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $53.01
Next Required Bid: $54.01
High Bidder: #297125
Began Closing:
Wednesday 12/04/2019
06:13 pm CDT

Lot is Closed

Assorted HSS Drill Set In Case (Not Complete) Including Assorted Tap & Body Sizes: 13/32-1/2
Commercial & Industrial > Metal Fabrication
Current Bid: $121.51
Next Required Bid: $126.51
High Bidder: #45311
Began Closing:
Wednesday 12/04/2019
06:13 pm CDT

Lot is Closed

Heinrich Tools Handnib Model:4-A Shear/Nibbler, 3/16" Mild Steel, Rod Cutting Cap. 3/16",1/4", 5/16", 3/16", 3/8" Round Cap. Vise-Mounting Hinge, On Heavy Duty Stand

This item can be loaded for $20
Commercial & Industrial > Metal Fabrication
Current Bid: $625.00
Next Required Bid: $675.00
High Bidder: #322071
Began Closing:
Wednesday 12/04/2019
06:14 pm CDT

Lot is Closed

Flagler 20Ga Rollformer Complete With Pittsburgh Drives, 3 inch 1 Rolls, 220V, 3 Phase

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $400.00
Next Required Bid: $425.00
High Bidder: #129029
Began Closing:
Wednesday 12/04/2019
06:14 pm CDT

Lot is Closed

Genie Model:SLA-20 Superlift Advantage Material Lift, Max Platform Height 21', 800lb Cap. 
Commercial & Industrial > Metal Fabrication
Current Bid: $450.00
Next Required Bid: $475.00
High Bidder: #110812
Began Closing:
Wednesday 12/04/2019
06:14 pm CDT

Lot is Closed

Milwaukee ProPEX Expansion tool, cat no. 2632-20, 18v battery and charger, expansion heads 1", 1-1/4" 1-1/2" in case
Commercial & Industrial > Metal Fabrication
Current Bid: $2,050.00
Next Required Bid: $2,125.00
High Bidder: #5207
Began Closing:
Wednesday 12/04/2019
06:15 pm CDT

Lot is Closed

Sweco 42 inch Vibratory Finisher Model FMB-4LR, Serial# FMD488830, Timer Model BO8K12320, Liner is in Good Condition/Lots of Life in it W/ Automated Compound Feed System Mod. 2460By: Automated Finish Systems Inc.Complete With: Timer, Automated Compound Feed System Mod. 2460, Auto, Empty/ Separation Gate, Clean Out Port, Factory Specs: ACTUAL CHAMBER CAPACITY 4 CUBIC FEET, Chamber Diameter..42 Inches, Processing Channel Width/Depth..10 X 10 Inches, Maximum Part Length..18 Inches, Maximum Gross Chamber Load..1200 Pounds, Minimum Lining Thickness in High Wear Areas..5/8 Inch, The chamber is also equipped with COMPOUND FEED NOZZLES, Wired 220 Volt 3 Phase.

This item can be loaded for $40
 
Commercial & Industrial > Metal Fabrication
Current Bid: $675.00
Next Required Bid: $725.00
High Bidder: #5207
Began Closing:
Wednesday 12/04/2019
06:15 pm CDT

Lot is Closed

Lockformer 22Ga 7 Station Roll Forming Machine, S/N:6379, 250V, 20A

This item can be loaded for $25
Commercial & Industrial > Metal Fabrication
Current Bid: $135.00
Next Required Bid: $140.00
High Bidder: #305518
Began Closing:
Wednesday 12/04/2019
06:15 pm CDT

Lot is Closed

Milwaukee Fuel cordless drills, (1) 12v and (1) 18v sets
Commercial & Industrial > Metal Fabrication
Current Bid: $1,115.00
Next Required Bid: $1,190.00
High Bidder: #256345
Began Closing:
Wednesday 12/04/2019
06:16 pm CDT

Lot is Closed

36" x 14 GA Metal Power Pinch Roll Slip Plate Capacity: 14 ga maybe 12 ga, Roll Length: 36", Roll Diameter: 3 1-2", Number of Rolls: 3, Mechanical Powered, Motor: 2 HP 220V 3-Ph, Features: Manual Lower Roll Adjust, Dimensions: Approx. 72" x 32" x 54", Weight: approx 1200 lbs

This item can be loaded for $40
 
Commercial & Industrial > Metal Fabrication
Current Bid: $234.00
Next Required Bid: $244.00
High Bidder: #182292
Began Closing:
Wednesday 12/04/2019
06:16 pm CDT

Lot is Closed

Honda GX60 5.5HP Gasoline Vibration Construction Plate Compactor 

This item can be loaded for $20
Commercial & Industrial > Metal Fabrication
Showing 1 to 50 of 281 items


Auction Details:

Surplus Auction December 2019

Metalworking Machinery, Welding Equipment and Tools

Lot list coming soon

Surplus Auction December 2019

Metalworking Machinery, Welding Equipment and Tools

Inspection:

Sat, Nov 30, 2019
10:00 am - 03:00 pm
Tue, Dec 03, 2019
09:00 am - 04:00 pm

Auction Closing:

Wed, Dec 04, 2019
06:00 pm

Removal:

Thu, Dec 05, 2019
09:00 am - 05:00 pm
Fri, Dec 06, 2019
09:00 am - 05:00 pm
Sat, Dec 07, 2019
09:00 am - 12:00 pm

Bidding Increments:

Bid Range Minimum Increment
$0.01 - $75.00$1.00
$75.01 - $150.00$5.00
$150.01 - $250.00$10.00
$250.01 - $500.00$25.00
$500.01 - $1,000.00$50.00
$1,000.01 - $5,000.00$75.00
$5,000.01 - $50,000.00$100.00
$50,000.01 - $75,000.00$250.00
$75,000.01 - $100,000.00$500.00
$100,000.01 - $2,500,000.00$1,000.00

Hammer Price TierBuyer's PremiumCap
$0.00 - $4,999.99 13.00%$1,000.00
$5,000.00 - infinity 10.00%$1,000.00


This auction is contracted and managed by: Fram Fram

Manager: Russ Hilk


This auction is contracted and managed by Fram Fram, LLC.  

By placing a bid on this auction you are agreeing to the auction specific terms listed below in addition to K-BID user terms.  For auctions contracted and managed by an Independent Affiliate, K-BID Online, Inc. is acting as a venue only and will not be involved in any disputes or issues regarding this auction.

Everything is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.

There is a 13% BUYERS PREMIUM (13% BP) for ALL items on this auction.

Applicable Minnesota Sales Tax will be collected.

At the close of the auction active items will remain open until no bids have been received for three minutes.

IMPORTANT NOTE: If the high bidder of an item does NOT acknowledge the purchase, K-BID systems reserves the right to determine how and to whom it will be resold. If we determine that the winning bid was not a bona fide bidder, the item WILL NOT AUTOMATICALLY go to the next second-highest bid.


This auction is contracted and managed by an independent affiliate. By placing a bid on this auction, you are agreeing to the auction specific terms listed on this page in additions to the K-BID user terms and agreements.  

K-BID Online, Inc. (K-BID) is responsible for maintaining the K-BID.com website.  K-BID.com serves as the venue used by independent auction companies (Affiliates) to present their online auctions to bidders.  

K-BID’s role in the auctions listed on K-BID.com is limited to providing the venue for affiliate auctions. Affiliates are not employees, agents, representatives or partners of K-BID Online, Inc. K-BID’s knowledge about individual auctions and individual auction transactions is limited to the information appearing on the website.

By placing a bid on K-BID.com, bidders are verifying they are at least 18 years old and acknowledging they understand and will comply with both the K-BID.com website terms and the auction specific terms. Bidders MUST NOT share their password or account information with anyone. Bidders are responsible for bids placed on their account.

Inspection dates/times are available for every auction. Bidders are strongly encouraged to inspect prior to placing bids. Removal day is not inspection day. When an auction ends, and the winning bidder invoice appears on the bidder’s dashboard, the bidder is obligated to honor their bid(s).

Every auction item is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.

Bidders are responsible for knowing and complying with auction terms. Failure to comply with removal terms may result in bidding privileges being disabled.  Once a bid is placed it cannot be retracted.

Sellers and their agents are prohibited from bidding on their own assets.

Items with a reserve will not be sold unless the reserve price has been met.

At the close of the auction, active items will remain open until no bids have been received for three minutes.

Applicable sales tax will be collected by the affiliate managing the auction.  

In the event that bidding rights are terminated due to no-show invoices, bidders MAY be reinstated at the discretion of K-BID only after a penalty fee of 20% of the unpaid invoice(s) and a reinstatement fee of $25.00 has been paid to K-BID and a scanned copy of your driver's license emailed to us. INVOICED ITEMS WILL NOT BE AWARDED. The payment is punitive and meant to deter no-shows. Duplicate bidder accounts will be deactivated when they are determined to exist. If possible and at our discretion, K-BID reserves the right to delete any bid we believe has been placed by a suspect bidder. Any registration that shows up on our fraud detection system may be placed on hold and bids removed until the user is verified. K-BID Online, Inc reserves the right to disallow anybody from bidding on its website. Cases of obvious bidding with no intent to redeem will be referred to appropriate legal authorities.

Affiliates may lower a lot reserve at any time before or after an auction closes.  If the reserve is lowered while the auction is in progress, the applicable reserve message will appear below the Next Required Bid information (Reserve Not Met or Reserve Has Been Met); the asset will sell to the high bidder if the lowered reserve amount is met. If the reserve is lowered after the auction closes, the highest bidder at auction close will receive a winning bidder invoice. 

Once an auction begins its closing process, outbid notifications will not be sent.

Once a bid is placed it cannot be retracted.

 



2830 Fairview Ave North
Roseville
MN, 55113


Phone: 612-564-3726

We offer shipping options for almost every item large or small. If you require shipping please send an email with your Bidder Number to info@framfram.com.  Once we have an actual shipping total we will email you payment instructions. Small items can be sent FedEx. For LTL, Pallets or Machinery we can ship with a company called uShip or a carrier of your choice.  There will be a $50 charge for most items that require a pallet. Machinery can be loaded for the loading fee listed with each machine.