WHITEFORD Complete Auto Shop, Lots of Snap-On, 86 Caballero, Wheel Aligner, AC Recovery, Plasma Cutter, Millermatic Welder

Whiteford Auction Services

Whiteford Auction Services

Auction Location: 908 1st St NE, Buffalo, MN 55313

Phone: 612-590-3748

Lot Categories: Automotive/Mechanical Equipment (316), Cars/Trucks/Motorcycles (2), Major Appliances (1)

Auction Closed
05/18/2020 06:30 pm

Closed



Filtered Results From This Auction:

Showing 1 to 50 of 316 items

Current Bid: $4,975.00
Next Required Bid: $5,050.00
High Bidder: #201046
Began Closing:
Monday 05/18/2020
06:31 pm CDT

Lot is Closed

Snap-On 19 drawer toolbox with the stainless steel top. Cost for this box was over $12,000. Drawers slide out with no problem. Size is 47 1/2 x 72 x 29 deep. Does not include the small snap on single drawer unit sitting on top.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $850.00
Next Required Bid: $900.00
High Bidder: #258740
Began Closing:
Monday 05/18/2020
06:32 pm CDT

Lot is Closed

MATCO Tool box on wheels with lock and key. 2 full drawers and 1 split drawer. Spring Lift lid. Bring help to move.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $401.00
Next Required Bid: $426.00
High Bidder: #320919
Began Closing:
Monday 05/18/2020
06:33 pm CDT

Lot is Closed

Wheel Aligner Model V-7. Powers up. Includes Owners Manual and accesories seen in front of machine. Inspect for details. Bring help to move located in lower area of the wheelallignment bay(about 4-5 steps)
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $1,830.00
Next Required Bid: $1,905.00
High Bidder: #137456
Began Closing:
Monday 05/18/2020
06:34 pm CDT

Lot is Closed

Hobart AirForce 625 DC Plasma Cutting System. Cost $3,225 new.Owner said it works.   Inspect for details. Bring help to move. 
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $1,625.00
Next Required Bid: $1,700.00
High Bidder: #324319
Began Closing:
Monday 05/18/2020
06:35 pm CDT

Lot is Closed

Miller Millermatic 250 CV-DC Arc Welding Power Source Wire Feeder with Central McGowan compressed gas tank. Owner said it was purchased new and used very little and works. Inspect for details. Bring help to move.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $475.00
Next Required Bid: $500.00
High Bidder: #38836
Began Closing:
Monday 05/18/2020
06:36 pm CDT

Lot is Closed

Air compressor with Steelfab 80 gallon Vertical Air Tank Part No. A10046. Inspect for details. Powered up and it works. We think it might be a 5HP engine. Please bring your own help and equipmet to move. You will need to disconnect the electric and cap off any open lines. We don't have a forklift.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $550.00
Next Required Bid: $600.00
High Bidder: #137650
Began Closing:
Monday 05/18/2020
06:38 pm CDT

Lot is Closed

100 Gallon Oil Storage Bin dispenser with almost 75 gallons 5W20 Synthetic Blend. Oil included. Inspect for details. Bring help to move.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $1,012.00
Next Required Bid: $1,087.00
High Bidder: #282996
Began Closing:
Monday 05/18/2020
06:39 pm CDT

Lot is Closed

Robinair  Enviro Charge R-134a Refrigerant Recovery Recycling & Recharging Station Model 34700. Just spoke with the owner and he said this unit works just fine and there is a tank that goes along with it with refrigerant in it.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $115.00
Next Required Bid: $120.00
High Bidder: #334954
Began Closing:
Monday 05/18/2020
06:40 pm CDT

Lot is Closed

30 Gallon Self Evacuating Vacuum Oil Extractor Drain System for changing oil professionally. Inspect for details. 
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $69.00
Next Required Bid: $70.00
High Bidder: #334954
Began Closing:
Monday 05/18/2020
06:41 pm CDT

Lot is Closed

White Industries Refrigerant Recovery Recycling Center Model 01050.  Includes 2 gas tanks & owners manual.  
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $1,000.00
Next Required Bid: $1,050.00
High Bidder: #137650
Began Closing:
Monday 05/18/2020
06:42 pm CDT

Lot is Closed

100 Gallon Steel Automatic Transmission Fluid(ATF) storage dispenser. Has about 50 gallons of ATF(ATF included) Inspect for details. Bring help to move.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $100.00
Next Required Bid: $105.00
High Bidder: #326198
Began Closing:
Monday 05/18/2020
06:43 pm CDT

Lot is Closed

JH Bender Model 306 wheel alignment and drive on platform. Please bring your own tools and equipment to remove. This lot includes the JH bender unit and the drive on platform. Please arrive in plenty of time to take apart before we close.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $285.00
Next Required Bid: $310.00
High Bidder: #266723
Began Closing:
Monday 05/18/2020
06:44 pm CDT

Lot is Closed

AMMCO Disc Brake Facing Mechanism Lathe with rolling workbench. Powers up. Measures 53 w x 28.5 d x 29 Tall. Includes all the parts as seen. Inspect for details. Does not include the brake shoe grinder at the opposite end of the bench however it is offered as lot# 13A. Bring your own help and equipment to move. We don't have a forklift.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $175.00
Next Required Bid: $185.00
High Bidder: #273672
Began Closing:
Monday 05/18/2020
06:45 pm CDT

Lot is Closed

10 Ton Portable Hydraulic Repair Kit Big Red Jack in case. Inspect for details. 

The Big Red 10-Ton Porta Power with Wheel Case is a convenient kit for heavy lifting in auto body, frame repair and other work. It lifts as high as 18-1/2 in. Snap lock design for fast and easy assembly. Automatic pump overload system prevents ram and equipment damage. Durable heavy walled extension tubes for long service life. Flex head features permanently molded interlocked rubber pad to prevent separation.

  • Heavy-duty hydraulic equipment for auto body, frame repair and construction jobs
  • Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, bending and spreading
  • Automatic pump overload system helps prevent damage to ram and equipment
  • Lifts as much as 10 tons
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $155.00
Next Required Bid: $165.00
High Bidder: #298462
Began Closing:
Monday 05/18/2020
06:46 pm CDT

Lot is Closed

Snap-On Visual Inspection Device Model BK5500 in case with owners manual.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $46.99
Next Required Bid: $47.99
High Bidder: #30659
Began Closing:
Monday 05/18/2020
06:47 pm CDT

Lot is Closed

AMMCO Model 890 Safe-Arc Brake Shoe Grinder. Powers up. This item will need to be removed from the work bench so please bring the necessary tools to do so.  Work Bench is part of lot 11.   Inspect for details. Bring help to move.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $39.00
Next Required Bid: $40.00
High Bidder: #256141
Began Closing:
Monday 05/18/2020
06:48 pm CDT

Lot is Closed

MAC Tools Hex/Allen Socket/Driver, 3/8" Drive, XD 4MM to 10 mm in Carrying Case.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $140.00
Next Required Bid: $145.00
High Bidder: #50175
Began Closing:
Monday 05/18/2020
06:49 pm CDT

Lot is Closed

3 Matco Combo MM Wrenches. 1 Snapon Combo10-11 MM Wrench. Holder. Snap-on 10, 11, 12, 13, 14, 15, 17, 18 mm wrenches. All in a holder.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $175.00
Next Required Bid: $185.00
High Bidder: #274374
Began Closing:
Monday 05/18/2020
06:50 pm CDT

Lot is Closed

4 Snap-on box end wrenches. 6 snap-on wrenches 10,12,13,14,15,16. Holder is Blue Point Wrench Rack Holder YA381
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $26.00
Next Required Bid: $27.00
High Bidder: #313813
Began Closing:
Monday 05/18/2020
06:51 pm CDT

Lot is Closed

6 Sockets: Snap-on Tools 1/4 Dr - 6PT -Impact Shallow Socket - IMFM24; Snap-on Hex Bit Socket Driver SAM17E;  Snap-on SMFIMM136 nonimpact socket; Snap-on SIMM 15 socket; Snap-on Deep Impact Socket;
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $275.99
Next Required Bid: $300.99
High Bidder: #71484
Began Closing:
Monday 05/18/2020
06:52 pm CDT

Lot is Closed

APX Master Fuel Injection Kit No. 6550. Inspect for details.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $1,475.00
Next Required Bid: $1,550.00
High Bidder: #137650
Began Closing:
Monday 05/18/2020
06:53 pm CDT

Lot is Closed

100 Gallon Motor Oil Storage dispenser system with a little over 75 Gallons 5W30 Synthetic Blend. Oil included. Bring help to move. 
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $200.00
Next Required Bid: $210.00
High Bidder: #274374
Began Closing:
Monday 05/18/2020
06:54 pm CDT

Lot is Closed

Snap-on 3/8 Drive Socket Ratchet Set Model 222FSP. Inspect for details.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $23.88
Next Required Bid: $24.88
High Bidder: #30659
Began Closing:
Monday 05/18/2020
06:55 pm CDT

Lot is Closed

AMMCO No. 6900 Twin Facing Tool. Inspect for details..  This currently sells for $355.00.  https://www.ebay.com/itm/Ammco-Brake-Lathe-6900-Twin-Cutting-Head-for-Rotors-With-10-Piece-Bits-Included/124134978794?epid=1323736143&hash=item1ce70574ea:g:XE8AAOSwGrBeN0ME 
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $71.00
Next Required Bid: $72.00
High Bidder: #334328
Began Closing:
Monday 05/18/2020
06:56 pm CDT

Lot is Closed

Current Bid: $66.00
Next Required Bid: $67.00
High Bidder: #19267
Began Closing:
Monday 05/18/2020
06:57 pm CDT

Lot is Closed

7 Snap-on wrenches. Each end is a different size. 
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $74.00
Next Required Bid: $75.00
High Bidder: #256141
Began Closing:
Monday 05/18/2020
06:58 pm CDT

Lot is Closed

Current Bid: $51.00
Next Required Bid: $52.00
High Bidder: #137456
Began Closing:
Monday 05/18/2020
06:59 pm CDT

Lot is Closed

Current Bid: $852.00
Next Required Bid: $902.00
High Bidder: #296001
Began Closing:
Monday 05/18/2020
07:00 pm CDT

Lot is Closed

Coats Direct Drive 700 Solid State Wheel Balancer. Snap-on Wheel Weight Pliers WWPR13A. P.D.Q Weight Tool. Vintage Wheel weight hammer. Bins of wheel weights. Bring help to move.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $195.00
Next Required Bid: $205.00
High Bidder: #333941
Began Closing:
Monday 05/18/2020
07:01 pm CDT

Lot is Closed

Snap-on Tool box. Measures 41w x 7.5t x 18d.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $260.00
Next Required Bid: $285.00
High Bidder: #274374
Began Closing:
Monday 05/18/2020
07:02 pm CDT

Lot is Closed

Proto & Snap-On 3/4 inch socket set. Comes with 14 sockets, 3 extenders(2 if them Snap-On), 1 sliding T handle and 1 MAC 3/4" Drive to 1/2" Socket adapter model AP2416. Appears that this was originally a Proto set.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $425.00
Next Required Bid: $450.00
High Bidder: #194997
Began Closing:
Monday 05/18/2020
07:03 pm CDT

Lot is Closed

Branick Strut Spring Compressor Model 7200 Bring your own tools & help for removal.  
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $190.00
Next Required Bid: $200.00
High Bidder: #328970
Began Closing:
Monday 05/18/2020
07:04 pm CDT

Lot is Closed

Snap-on Valve Refacer Grinder Model VR500. Powers up. Inspect for details. Bring help to move.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $280.00
Next Required Bid: $305.00
High Bidder: #139907
Began Closing:
Monday 05/18/2020
07:05 pm CDT

Lot is Closed

Parts Washer with drum.  Please bring your own help for removal.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $68.00
Next Required Bid: $69.00
High Bidder: #334328
Began Closing:
Monday 05/18/2020
07:06 pm CDT

Lot is Closed

Current Bid: $1,350.00
Next Required Bid: $1,425.00
High Bidder: #62150
Began Closing:
Monday 05/18/2020
07:07 pm CDT

Lot is Closed

Snap-On 13 Drawer tool box on casters. Size is 19 3/4 x 40 x 37 1/2.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $280.00
Next Required Bid: $305.00
High Bidder: #274374
Began Closing:
Monday 05/18/2020
07:08 pm CDT

Lot is Closed

Auto Specialty Tools: Pliers, vise grips,  wire cutters, some vintage. Inspect for details.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $61.00
Next Required Bid: $62.00
High Bidder: #333941
Began Closing:
Monday 05/18/2020
07:09 pm CDT

Lot is Closed

Current Bid: $95.00
Next Required Bid: $100.00
High Bidder: #282996
Began Closing:
Monday 05/18/2020
07:10 pm CDT

Lot is Closed

Snap-On Refrigerant Gas Leak Detector Model ACT795UV
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $320.00
Next Required Bid: $345.00
High Bidder: #258740
Began Closing:
Monday 05/18/2020
07:11 pm CDT

Lot is Closed

61 pieces sockets, mostly Snap on. At least 9 flexible sockets. Some Hex sockets.  Inspect for details.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $71.00
Next Required Bid: $72.00
High Bidder: #87486
Began Closing:
Monday 05/18/2020
07:12 pm CDT

Lot is Closed

Current Bid: $73.00
Next Required Bid: $74.00
High Bidder: #333941
Began Closing:
Monday 05/18/2020
07:13 pm CDT

Lot is Closed

Current Bid: $96.00
Next Required Bid: $101.00
High Bidder: #249228
Began Closing:
Monday 05/18/2020
07:14 pm CDT

Lot is Closed

Snap-On Triple Square Socket Drivers Part #TSSKIT
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $135.00
Next Required Bid: $140.00
High Bidder: #298462
Began Closing:
Monday 05/18/2020
07:15 pm CDT

Lot is Closed

Snap-On Low Amp Probe model EETA308A to be used with lot 30A Snap-On Vantage unit.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $105.00
Next Required Bid: $110.00
High Bidder: #34947
Began Closing:
Monday 05/18/2020
07:16 pm CDT

Lot is Closed

Snap-on 18 inch Breaker Bar. 1/2 inch drive. SN18A.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $13.00
Next Required Bid: $14.00
High Bidder: #38836
Began Closing:
Monday 05/18/2020
07:17 pm CDT

Lot is Closed

Rare German Chromavan One-hander Stickle Back Adjustable Wrench
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $61.00
Next Required Bid: $62.00
High Bidder: #56786
Began Closing:
Monday 05/18/2020
07:18 pm CDT

Lot is Closed

MATCO Half moon wrench 10mm and 12mm; and Snap-on Half Moon wrench. Snap-on 18 and 21 box end wrench, Snap-on 7/16 and 1/2 wrench; MAC Combo wrench 18 and 19; 2  TORX Standard 10
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $125.00
Next Required Bid: $130.00
High Bidder: #283183
Began Closing:
Monday 05/18/2020
07:19 pm CDT

Lot is Closed

PROTO 500 Wrench Set in Case. Looks like new. Very nice set.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $116.00
Next Required Bid: $121.00
High Bidder: #318949
Began Closing:
Monday 05/18/2020
07:19 pm CDT

Lot is Closed

Auto Specialty Tools: Snap-on, Kent-Moore, Mac. Bar type puller. Valve spring compressor tool. Lisle Ridge Reamer. Cut-off wheels. Proto Puller. MAC Power Steering Pump Pully Installer Tool. And much more. Inspect for details.
Commercial & Industrial > Automotive/Mechanical Equipment
Current Bid: $400.00
Next Required Bid: $425.00
High Bidder: #273672
Began Closing:
Monday 05/18/2020
07:19 pm CDT

Lot is Closed

Gray ASJ 4000H Air Lift. Hooked it up to air and it works. 
Please bring your own help for removal.  
Commercial & Industrial > Automotive/Mechanical Equipment
Showing 1 to 50 of 316 items


Auction Details:

WHITEFORD Auctions presents a Complete Auto Shop. Lots and lots of Snap-On tools including a $12,000 Snap-On tool box, Snap-On power tools, Snap-On hand tolls, 1986 Caballero(GMC's version of the El Camino), Wheel Aligner, AC Recovery, Plasma Cutter, Millermatic Welder and a whole lot more.  All 300 plus lots are great high quality high end lots. 

JUST A REMINDER BIDDERS ARE RESPONSIBLE FOR REMOVING, DISCONNECTING & LOADING YOUR OWN ITEMS. There is a large parking lot so if you need to bring your own skid steer there should be room there or on the street.  

We do not have a forklift on site 

You MUST take all items in a lot that you win not just the items you want unless the lot states you don't have to take all items. 

Cash. Debit or Credit Cards Only Please

JUST A REMINDER BIDDERS ARE RESPONSIBLE FOR REMOVING, DISCONNECTING & LOADING YOUR OWN ITEMS.  We do not have a forklift on site 

Credit Cards up to $5,000 per card

Bank Certified Cashiers Check only for Invoices over $1,000 as long as we can verify from the bank that the funds were drawn on your bank and with proper ID. Please check with your bank first to see if they will speak with us.  Also let us know before pick up day if you are bringing a Bank Certified Cashiers Check

NO Checks of any kind, sorry

Pick up day ONLY for the date given 

Please bring your own dollies, help and equipment to move any items.  

Please review all terms.

Please bring your own help to move items as well as packing material or pallets if needed. All items located on ground level. 

Questions?

(Be sure to know Auction Name and Lot Number when you contact us)

Call or Text (Texting Preferred) : (612) 590-3748

email: jeffwhiteford@msn.com 

Additional Helpful Information: 

Payments: We prefer cash payments but accept credit cards. If paying by credit card please from your K-BID.com Dashboard make payment if possible before pick up day to make it more efficient when you arrive. We also take payments onsite during the removal.

Payment Methods Accepted: Cash, Credit/Debit Card (Up to $5,000 per card), Wire Transfer for larger amounts only. (Please Call first before auction ends to get prior approval for wire transfer). No product will be released until all funds have cleared if paying with a wire transfer.  

Whiteford Auctions is looking for their next Commercial Equipment or High End Estate Auction!!! 

Let me put my 29 years of experience & Minnesota's largest online auction to work & help you sell your assets. 

Inspection:

Fri, May 15, 2020
01:00 pm - 03:00 pm

Auction Closing:

Mon, May 18, 2020
06:30 pm

Removal:

Wed, May 20, 2020
10:00 am - 06:00 pm

Bidding Increments:

Bid Range Minimum Increment
$0.01 - $75.00$1.00
$75.01 - $150.00$5.00
$150.01 - $250.00$10.00
$250.01 - $500.00$25.00
$500.01 - $1,000.00$50.00
$1,000.01 - $5,000.00$75.00
$5,000.01 - $50,000.00$100.00
$50,000.01 - $75,000.00$250.00
$75,000.01 - $100,000.00$500.00
$100,000.01 - $2,500,000.00$1,000.00

Hammer Price TierBuyer's PremiumCap
$0.00 - $4,999.99 13.00%
$5,000.00 - infinity 10.00%$1,000.00


This auction is contracted and managed by: Whiteford Auction Services

Manager: Jeff Whiteford


Payments accepted: Cash or Credit Card Only, NO CHECKS OF ANY KIND, Credit Cards only up to $4,995 per transaction per card. 

No Early or Late Preview Or Remove will be allowed.   The Only Preview time available is Displayed at the Bottom of each Bid Page for the Auction. 

A Whiteford Auction Representative Must Be Present for Preview and Removal. 

A $40.00 Trip Charge will be Added to any Invoice that Requires a Staff Member to Return to the Sale Site Before or after the Preview or Removal Times. This DOES NOT MEAN we will allow you to come a day other then the date given for removal.

As with all K-BID.com Auctions, The Buyer is responsible Inspecting All items prior to Bidding and Safe, Neat Removal and Loading of the Items. 

Please bring Help, Tools and the Proper size equipment or Vehicle to Haul your items.   Auction Staff  is available Onsite to Help FIND Your Items.  They Are NOT FREE Loading Labor!!! 

IF you Need Help Loading and "if" there is auction staff available a Fee of $20.00 to $50.00 per Item dependent on Size, Weight and Location. Auction staff is not always available so please plan on bringing your own help. This does not include large or heavy items those items you must be prepared to bring your own help and equipment to remove.

 

Items must be paid for by the pick up date. Any item(s) not picked up on the scheduled day will not be held by the auctioneer unless arrangements were made before auction close. Most auctions are held on-site at our client's location so we will not take responsibility for items not picked up on the scheduled date even if they were paid for.


This auction is contracted and managed by an independent affiliate. By placing a bid on this auction, you are agreeing to the auction specific terms listed on this page in additions to the K-BID user terms and agreements.  

K-BID Online, Inc. (K-BID) is responsible for maintaining the K-BID.com website.  K-BID.com serves as the venue used by independent auction companies (Affiliates) to present their online auctions to bidders.  

K-BID’s role in the auctions listed on K-BID.com is limited to providing the venue for affiliate auctions. Affiliates are not employees, agents, representatives or partners of K-BID Online, Inc. K-BID’s knowledge about individual auctions and individual auction transactions is limited to the information appearing on the website.

By placing a bid on K-BID.com, bidders are verifying they are at least 18 years old and acknowledging they understand and will comply with both the K-BID.com website terms and the auction specific terms. Bidders MUST NOT share their password or account information with anyone. Bidders are responsible for bids placed on their account.

Inspection dates/times are available for every auction. Bidders are strongly encouraged to inspect prior to placing bids. Removal day is not inspection day. When an auction ends, and the winning bidder invoice appears on the bidder’s dashboard, the bidder is obligated to honor their bid(s).

Every auction item is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.

Bidders are responsible for knowing and complying with auction terms. Failure to comply with removal terms may result in bidding privileges being disabled.  Once a bid is placed it cannot be retracted.

Sellers and their agents are prohibited from bidding on their own assets.

Items with a reserve will not be sold unless the reserve price has been met.

At the close of the auction, active items will remain open until no bids have been received for three minutes.

Applicable sales tax will be collected by the affiliate managing the auction.  

In the event that bidding rights are terminated due to no-show invoices, bidders MAY be reinstated at the discretion of K-BID only after a penalty fee of 20% of the unpaid invoice(s) and a reinstatement fee of $25.00 has been paid to K-BID and a scanned copy of your driver's license emailed to us. INVOICED ITEMS WILL NOT BE AWARDED. The payment is punitive and meant to deter no-shows. Duplicate bidder accounts will be deactivated when they are determined to exist. If possible and at our discretion, K-BID reserves the right to delete any bid we believe has been placed by a suspect bidder. Any registration that shows up on our fraud detection system may be placed on hold and bids removed until the user is verified. K-BID Online, Inc reserves the right to disallow anybody from bidding on its website. Cases of obvious bidding with no intent to redeem will be referred to appropriate legal authorities.

Affiliates may lower a lot reserve at any time before or after an auction closes.  If the reserve is lowered while the auction is in progress, the applicable reserve message will appear below the Next Required Bid information (Reserve Not Met or Reserve Has Been Met); the asset will sell to the high bidder if the lowered reserve amount is met. If the reserve is lowered after the auction closes, the highest bidder at auction close will receive a winning bidder invoice. 

Once an auction begins its closing process, outbid notifications will not be sent.

Once a bid is placed it cannot be retracted.

 



908 1st St NE
Buffalo
MN, 55313


Phone: 612-590-3748

Winning bidder is responsible for inspecting prior to purchase. Failure to pay for and pick up items may result in loss of bidding privileges. There is a shipping company who has agreed to ship small items. Shipping for small lots only (no "contents lots" or large items) PLEASE CALL Jeff at 612-590-3748 the day before pickup if you want your items shipped. We may be too busy the day of pickup to take payment on shipped items. Shipping will have a $10.00 courier fee plus shipping and handling cost from the UPS store. You will pay the UPS store directly for shipping and pay us for your auction item and the courier fee. All sold as is with no guarantees so please inspect. Please bring your own boxes to pack your items. We try our best to accurately describe every item however if there is a discrepancy between the lot pictures and the description we will use the description. Please bring your own boxes for packaging. Bidders responsibility to test all electrical items. We do not ship firearms or ammunition.