Manufacturing Plant Relocation Auction

Fram Fram

Fram Fram

Auction Location: 21730 Hanover Ave, Lakeville, MN 55044

Phone: 612-564-3726

Lot Categories: Metal Fabrication (374)

Begins Closing Tuesday
06/09/2020 05:20 pm

Active



Filtered Results From This Auction:

Showing 1 to 50 of 386 items

Current Bid: $460.00
Next Required Bid: $485.00
High Bidder: #256300
Begins Closing:
Tuesday 06/09/2020
05:20 pm CDT

Time Remaining:

3d 1h 34m

2012 Gorbel Free Standing Work Station Jib Crane, Serial Number 338931. 500lb rated capacity, 360 Deg Swivel, 9 foot Under Boom, 14 foot Jib Length, Free standing, Floor Flush design (bolted to floor), Top Entry Electrical Connector, Includes 1/4 ton Harrington Electric Hoist, size B, code no. NER003SD, serial no. 00101994, 1/4 Ton Rated Capacity, 6-36 fpm lift speed, pendant control, 208-230v, 3-phase

TK Rigging can dismantle and load for $600 on Friday June 12th. Please Contact Tom at 612-720-1243 with any questions. 





 
Commercial & Industrial > Metal Fabrication
Current Bid: $1,725.98
Next Required Bid: $1,800.98
High Bidder: #126095
Begins Closing:
Tuesday 06/09/2020
05:21 pm CDT

Time Remaining:

3d 1h 35m

Clausing Colchester Model 17 Engine Lathe, Serial Number 7/0218/13128
SWING OVER BED: 17-1/4 inch
SWING OVER CROSS SLIDE: 10-1/2 inch
DISTANCE BETWEEN CENTERS: 60 inch
HOLE THRU SPINDLE: 3-1/16 inch
SPINDLE NOSE, CAMLOCK SIZE: D1-8 inch
SPINDLE SPEEDS: (16):20 - 1600 RPM
HEADSTOCK & TAILSTOCK SPINDLE TAPER: #5 MORSE
TAILSTOCK SPINDLE TRAVEL: 7 inch
TAILSTOCK SPINDLE DIAMETER: 2-15/16 inch
WIDTH OF BED: 13-1/2 inch
FEEDS:
LONGITUDINAL (45): .002 - .032 IPR
CROSS (45): .001 - .016 IPR
THREADS:
INCH (45): 2 - 72 TPI
METRIC (39): .4 - 14 mm
DIMENSIONS: 118 x 42 x 52 inches
APPROX WEIGHT: 5,600 LBS
Includes: Jacobs Keyed Chuck onb 5MT Shank, 12" 3-Jaw Chuck, MH130 Quick Change Tool Post & 5 Holders.
Overall dimensions 120 x 43 x 55 inches, approximate 8,000 lbs 

TK Rigging can do a basic lift and load for $200 on Friday June 12th. Please Contact Tom at 612-720-1243 with any questions.
Commercial & Industrial > Metal Fabrication
Current Bid: $4,150.00
Next Required Bid: $4,225.00
High Bidder: #336759
Begins Closing:
Tuesday 06/09/2020
05:22 pm CDT

Time Remaining:

3d 1h 36m

2007 JLG Model 1930 ES Electric Scissor Lift, Serial Number 0200166391.  189 total indicated hours. 18.8 foot Max Platform Lift, 25 foot Working height, 500 Lb Unrestricted Capacity, 250lb capacity on extension, 2820 Machine Weight. Interstate Deep Cycle Batteries. 2.5 x 6.1 foot platform, 3 foot extension, Joystick controlled, built in 120V battery charger.
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Begins Closing:
Tuesday 06/09/2020
05:23 pm CDT

Time Remaining:

3d 1h 37m

Print Your Buyers Guide Here:

Plant Equipment with Photos (47 pages)
Plant Equipment without Photos (18 Pages)
Office with Photos (13 Pages)
Office without Photos (6 Pages)
 
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Begins Closing:
Tuesday 06/09/2020
05:24 pm CDT

Time Remaining:

3d 1h 38m

All the office furniture is being sold in a separate auction. Click here to view that auction. Same preview times and checkout times.
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Begins Closing:
Tuesday 06/09/2020
05:25 pm CDT

Time Remaining:

3d 1h 39m

If you are feeling sick or have any known exposure to anyone
with COVID-19 it is imperative that you NOT come to the auction site.

 
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Begins Closing:
Tuesday 06/09/2020
05:26 pm CDT

Time Remaining:

3d 1h 40m

Previews:
Please use common sense. If you are not feeling well do not show up. If you just want to come look at the stuff and are not a serious buyer please sit this one out. 

Live previews will be held on
Saturday, June 6 from 9-2
Monday, June 8 from 12-6

by appointment if necessary, please email info@framfram.com for details. 

No one under the age of 18 is allowed onsite.

If you are an older adult or a person of any age who has serious underlying medical conditions that may be at higher risk for more serious complications from COVID-19 do not attend this preview.
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Begins Closing:
Tuesday 06/09/2020
05:28 pm CDT

Time Remaining:

3d 1h 42m

Onsite payments with cash or business check are preferred, you can pay online or onsite with a credit card. ALL ITEMS MUST BE PAID IN FULL BY SATURDAY JUNE 13.
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Begins Closing:
Tuesday 06/09/2020
05:29 pm CDT

Time Remaining:

3d 1h 43m

DO NOT SHOW UP FOR CHECKOUT WITHOUT AN APPOINTMENT. YOU WILL HAVE TO WAIT UNTIL THERE IS AN OPEN SLOT.

Checkout by appointment will be on 
Thursday, June 11 from 8-5
Friday, June 12 8-5
Saturday, June 13 8-3
No one under 18 allowed onsite.

If you are an older adult or a person of any age who has serious underlying medical conditions that may be at higher risk for more serious complications from COVID-19 please do not show up for checkout.

Everything must be removed during our checkout period. If you cannot comply, do not bid. No refunds will be given if you do not comply with these terms. Shipping will be available where applicable, we can also band items to a pallet and load on local delivery truck for a nominal charge. We can also ship UPS.

The number of buyers onsite will be limited. This is why you must have an appointment for checkout. Groups of up to 5 people per buyer are allowed, if you plan on bringing more help please let us know before you show up. Only people helping in removal will be allowed onsite.

Curbside checkout is available. Please email us at info@framfram.com at the time you make your appointment if you want your items left outside the building for self loading. 

If you are feeling sick or have any known exposure to anyone with COVID19 do not participate in this auction.
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Begins Closing:
Tuesday 06/09/2020
05:30 pm CDT

Time Remaining:

3d 1h 44m

  • Curbside checkout is available when requested and possible
  • You will be allowed in the building to hand carry your items for removal
  • You can only operate powered equipment in the building if we have your insurance on file. Email ryan@framfram.com for details
  • We can ship small items Fed-Ex at your cost
  • We can band larger items to a pallet for local or LTL delivery
  • We will have a forklift onsite to load heavy items for a monomial charge (plan on $10-20 a pallet to cover the cost of the driver.) If you show up and complain about the cost to load your items, the cost will double. 
Commercial & Industrial > Metal Fabrication
Current Bid: $850.00
Next Required Bid: $900.00
High Bidder: #37357
Begins Closing:
Tuesday 06/09/2020
05:31 pm CDT

Time Remaining:

3d 1h 45m

(6) Sections of 42" x 144" Pallet Racking
Pallet Racking tear drop type to include:
(7) 42 x 144 inch uprights,
(48) 96 x 4 inch cross beams,
(48) 42 inch decking
Commercial & Industrial > Metal Fabrication
Current Bid: $1,560.00
Next Required Bid: $1,635.00
High Bidder: #321174
Begins Closing:
Tuesday 06/09/2020
05:32 pm CDT

Time Remaining:

3d 1h 46m

Bridgeport 1J Vertical Milling Machine
Make: Bridgeport
Model: 1J
Type: Vertical Milling Machine
Serial Number: 12BR 63101
9 in x 42 in T-Slotted Table,
24 in Longitudinal Table Travel,
12 in Cross Table Travel,
13 in Vertical Knee Adjustment,
3-phase
Overall dimensions 61 x 57 x 77 inches
Approximate 1,200 lbs
5 in Quill Travel,
80-2720 Belted Spindle Speeds,
R8 Spindle Taper,
Power Feed
One-Shot Lube,
1 HP 208/220/440 Volt 3-Phase Motor and Controls

$75 For a Basic Lift and Load
Commercial & Industrial > Metal Fabrication
Current Bid: $210.00
Next Required Bid: $220.00
High Bidder: #67572
Begins Closing:
Tuesday 06/09/2020
05:33 pm CDT

Time Remaining:

3d 1h 47m

(1) Section of 42" x 144" Pallet Racking
Pallet Racking tear drop type to include:
(2) 42 x 144 inch uprights,
(8) 96 x 4 inch cross beams,
(8) 42 inch decking
Commercial & Industrial > Metal Fabrication
Current Bid: $235.69
Next Required Bid: $245.69
High Bidder: #11978
Begins Closing:
Tuesday 06/09/2020
05:34 pm CDT

Time Remaining:

3d 1h 48m

Haas Model HRT210SHS CNC Rotary Indexer, Serial Number 250020. 210mm (8.3 inch) Platter Size. (Similar to a HRT210 the SHS stands for Super High Speed, this compact system yields high stiffness, high torque, and high speed values.) Includes interface cables, 6 inch A-Frame Support and 22 inch custom fixture. Mounted to a 14 x 33 inch Heavy Duty Steel Plate 
Commercial & Industrial > Metal Fabrication
Current Bid: $42.00
Next Required Bid: $43.00
High Bidder: #337193
Begins Closing:
Tuesday 06/09/2020
05:35 pm CDT

Time Remaining:

3d 1h 49m

(9) shelving unit setup with total 54 shelves, each section 36 x 11-1/2 x 87 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $145.00
Next Required Bid: $150.00
High Bidder: #53397
Begins Closing:
Tuesday 06/09/2020
05:35 pm CDT

Time Remaining:

3d 1h 49m

2013 Magnaflux Model S-1212 Demagnetizer, Serial Number 213163. Continuous Duty, 12 x 12 inch Window, Magnetizing Current Capacity: 7,500 A-Turns, Footprint: 24L x 11.8W x 24H inch, 285 lbs, 230/460 Volt, 31/15 Amp, 60 hz Single Phase Electrics. (used on one job)
Note: Transformer used tin conjunction with this unit available and sold separately. 

$25 For a Basic Lift and Load
Commercial & Industrial > Metal Fabrication
Current Bid: $5,075.00
Next Required Bid: $5,175.00
High Bidder: #336940
Begins Closing:
Tuesday 06/09/2020
05:35 pm CDT

Time Remaining:

3d 1h 49m

New in 2017 Never Used!!
Edwards 55 Ton Ironworker
Wired 220 Volt 3 Phase
RATED TONNAGE New Model 55T
MAX. CAPACITY 1-1/6 inch dia. in 5/8 inch A36
(65,000 PSI Tensile)
STROKE 1-1/4 inch
THROAT DEPTH 7-1/2 inch
OPEN HEIGHT 8-1/8 inch
SHUT HEIGHT 6-7/8
WORK HEIGHT 36-9/16
FLAT BAR SHEAR:
MAX. CAPACITY 3/8 x 14 inch
1/2 x 12 inch
3/4 x 4 inch
MAX. ROUND CAPACITY 7/8 inch
MAX. SQUARE CAPACITY 7/8 inch
WORK HEIGHT 34-3/4 inch
ANGLE SHEAR:
MAX. SIZE 3 x 3 x 3/8 inch
4 x 4 x 1/4 inch
WORK HEIGHT 39-7/8 inch
OPEN STATION
THROAT DEPTH 11-3/16 inch
OPEN HEIGHT 8-1/8 inch
SHUT HEIGHT 6-7/8 inch
WORK HEIGHT 34-1/2 inch
GENERAL SPECIFICATIONS:
STANDARD MOTOR 5 HP 3 Phase 208/240v
1725 RPM 14 AMP
HYDRAULIC PUMP 3-1/2 GPM ? 1 STAGE
VALVE PRESSURE 2500 PSI
RESERVOIR 7 GALLONS
CYLINDER 2-1/2 inch Ram
DIMENSIONS:
DEPTH 36-1/8 inch
WIDTH 44-3/8 inch
HEIGHT 55-1/4 inch
SHIPPING WT. 2480 lb

$50 For a Basic Lift and Load 
 

Commercial & Industrial > Metal Fabrication
Current Bid: $11.00
Next Required Bid: $12.00
High Bidder: #196655
Begins Closing:
Tuesday 06/09/2020
05:36 pm CDT

Time Remaining:

3d 1h 50m

1998 Airflow Systems Model 2400VOM Mist Collector, Serial Number: 244948. Full Model: 2400VOM-BI-CV-PG7-S, Part Number: 2400-2ACV-95XX-07BI. 2400 CFM, 3-HP 230/3PH Motor, on Stand. Overall dimensions 48 x 26 x 99 inches

$50 For a Basic Lift and Load
Commercial & Industrial > Metal Fabrication
Current Bid: $125.00
Next Required Bid: $130.00
High Bidder: #2464
Begins Closing:
Tuesday 06/09/2020
05:36 pm CDT

Time Remaining:

3d 1h 50m

(2) sections Uline 6- locker set inside dimensions 12 x 16 x 35 inches, hooks, padlock-able type handle, overall dimensions 36 x 18 x 72 inches
 
Commercial & Industrial > Metal Fabrication
Current Bid: $210.00
Next Required Bid: $220.00
High Bidder: #210647
Begins Closing:
Tuesday 06/09/2020
05:36 pm CDT

Time Remaining:

3d 1h 50m

Justrite Sure-Grip EX Flammable liquid storage cabinet, model 893020, 30 gallon, adjustable shelf, self closing doors, 43 x 18 x 44-1/4 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $325.45
Next Required Bid: $350.45
High Bidder: #303911
Begins Closing:
Tuesday 06/09/2020
05:37 pm CDT

Time Remaining:

3d 1h 51m

Make: Clausing
Model: 1642
Serial No: 112158
Spindle Speeds: (5) 400 to 5400 rpm
Spindle Taper: No. 2
Spindle Stroke: 4 inch
Tilting Table Size: 10 x 14 inches
Power: 3/4 Hp, 110v single phase
Equipped with: Tilting Work Table, Jacobs, 1/2 inch Drill Chuck, Updated ON/OFF EStop Control
Commercial & Industrial > Metal Fabrication
Current Bid: $525.00
Next Required Bid: $575.00
High Bidder: #126095
Begins Closing:
Tuesday 06/09/2020
05:37 pm CDT

Time Remaining:

3d 1h 51m

Make: Autoquip
Model: 36S40
Capacity: 4,000 Lbs
Table Size: 36 x 54 inches
Max Lift: 42 inch
Lowered Height: 7 inch
Voltage: 115V Single Phase
Serial Number: 89555506

 
Commercial & Industrial > Metal Fabrication
Current Bid: $210.00
Next Required Bid: $220.00
High Bidder: #29958
Begins Closing:
Tuesday 06/09/2020
05:37 pm CDT

Time Remaining:

3d 1h 51m

Uline Rolling step ladder, no. 714, 130 inches to top step, 7 x 24 inch steps, foot locking mechanism, total overall dimensions 45 x 96 x 173
Commercial & Industrial > Metal Fabrication
Current Bid: $199.69
Next Required Bid: $209.69
High Bidder: #301207
Begins Closing:
Tuesday 06/09/2020
05:38 pm CDT

Time Remaining:

3d 1h 52m

(5) Assorted metal parts bins, assorted end mills and drill bits, smaller units are 14-3/4 x 7-1/4 x 7-3/4 inch, larger unit 34 x 12-1/4 x 11 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $310.00
Next Required Bid: $335.00
High Bidder: #205985
Begins Closing:
Tuesday 06/09/2020
05:38 pm CDT

Time Remaining:

3d 1h 52m

KBC Model SGS-618V Surface Grinder, Serial Number 900251-2. 6 x18 inches, magnetic chuck, 8 inch max wheel size, 120V Adapter, One Shot Lube, 1HP 220/440 3-PH Spindle motor, overall dimensions 38 x 41 x 69 inches, Approximate 500 lbs

$75 For a Basic Lift and Load
Commercial & Industrial > Metal Fabrication
Current Bid: $21.00
Next Required Bid: $22.00
High Bidder: #243258
Begins Closing:
Tuesday 06/09/2020
05:38 pm CDT

Time Remaining:

3d 1h 52m

Safety-Kleen spry gun cleaner, model SK81280, 20 inch diameter by 10 inch deep, pneumatic operation, overall dimensions 34 x 16 x 40 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $625.00
Next Required Bid: $675.00
High Bidder: #336937
Begins Closing:
Tuesday 06/09/2020
05:39 pm CDT

Time Remaining:

3d 1h 53m

2011 Nilfisk Advance Model Warrior X32D-C Walk Behind Floor Scrubber, Serial Number N4000011718, 32 inch Path, 120V Built in Charger, New Interstate Batteries Installed 7/2019. 4181 Indicated Hours at time of description. 

NOTE: This unit will not be available for pickup until the following week after checkout. It will be used to clean the floors after all the items are removed. Seller takes full responsibility for any repairs should it get damaged between the time it's sold and available for pickup.
Commercial & Industrial > Metal Fabrication
Current Bid: $75.00
Next Required Bid: $76.00
High Bidder: #337143
Begins Closing:
Tuesday 06/09/2020
05:39 pm CDT

Time Remaining:

3d 1h 53m

Wilton 6 inch bench vise, model C006
Commercial & Industrial > Metal Fabrication
Current Bid: $43.00
Next Required Bid: $44.00
High Bidder: #63868
Begins Closing:
Tuesday 06/09/2020
05:39 pm CDT

Time Remaining:

3d 1h 53m

(3) Fan air circulators on pedestals, 30 inch diameter, (2) 2-speeds and (1) single speed, 120 volt
Commercial & Industrial > Metal Fabrication
Current Bid: $210.00
Next Required Bid: $220.00
High Bidder: #67572
Begins Closing:
Tuesday 06/09/2020
05:40 pm CDT

Time Remaining:

3d 1h 54m

(1) Section of 42" x 144" Pallet Racking
Pallet Racking tear drop type to include:
(2) 42 x 144 inch uprights,
(5) 99 x 4 inch crossbeams,
(1) 99 x 5 inch cross beam,
(6) 42 inch decking
Commercial & Industrial > Metal Fabrication
Current Bid: $95.00
Next Required Bid: $100.00
High Bidder: #337143
Begins Closing:
Tuesday 06/09/2020
05:40 pm CDT

Time Remaining:

3d 1h 54m

Butcher block top workbench 72 x 30 x 34 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $22.00
Next Required Bid: $23.00
High Bidder: #286271
Begins Closing:
Tuesday 06/09/2020
05:40 pm CDT

Time Remaining:

3d 1h 54m

Wilton 5 inch bench vise, model 745
Commercial & Industrial > Metal Fabrication
Current Bid: $101.00
Next Required Bid: $106.00
High Bidder: #306543
Begins Closing:
Tuesday 06/09/2020
05:41 pm CDT

Time Remaining:

3d 1h 55m

Dumping Hopper with forklift slots, 23 x 24 x 44 inside hopper, overall dimensions 25-1/2 x 45 x 34 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $3,650.00
Next Required Bid: $3,725.00
High Bidder: #336759
Begins Closing:
Tuesday 06/09/2020
05:41 pm CDT

Time Remaining:

3d 1h 55m

2013 Nissan Model MCP1F1A18LV Fork Lift Truck, Serial Number CP1F1-9N3155. 3,000 LB Rated Capacity, 187 inch Lift, 3-Stage Mast, Side Shift Cushion Tires, LP Powered, 42 inch forks, ROPS, 3,285 Indicated Hours at time of description.

LP Tank can be used for loading but is not included. 

NOTE: This forklift will not be available until approximately a week after the auction checkout. Seller assumes full responsibility for any repairs required due to damage after it is sold but before it is available for pickup. 
Commercial & Industrial > Metal Fabrication
Current Bid: $785.00
Next Required Bid: $835.00
High Bidder: #9884
Begins Closing:
Tuesday 06/09/2020
05:41 pm CDT

Time Remaining:

3d 1h 55m

2012 Kaeser SK20 Screw Type Air Compressor, Serial Number 1189. Part No. 101978.0, 125 PSIG, 88 CFM, 20 HP 208/230/460 3-Ph, 30 x 36 x 50 inches, 705 lbs. 57,040 Indicated Hours

$50 For a Basic Lift and Load
Commercial & Industrial > Metal Fabrication
Current Bid: $200.00
Next Required Bid: $210.00
High Bidder: #29958
Begins Closing:
Tuesday 06/09/2020
05:42 pm CDT

Time Remaining:

3d 1h 56m

EGA products rolling step ladder, 129 inch height at top step, 7 x 23-1/2 inch steps, locking mechanism, total overall dimensions 33 x 98 x 167 inches, split apart segmented at 57 inch from floor.
Commercial & Industrial > Metal Fabrication
Current Bid: $26.00
Next Required Bid: $27.00
High Bidder: #336904
Begins Closing:
Tuesday 06/09/2020
05:42 pm CDT

Time Remaining:

3d 1h 56m

Harrington 1/4 ton hoist, code no. HER 003SD, serial no. 00132813, 6-36 ft/min, pendant control, 208-230v, 3-phase, includes standing track unit, 113 x 32 inch upright stands bolted to floor and wall (bring tools to remove), 30 foot welded beam
Commercial & Industrial > Metal Fabrication
Current Bid: $0.00
Next Required Bid: $5.00
High Bidder: Be the First to Bid
Begins Closing:
Tuesday 06/09/2020
05:42 pm CDT

Time Remaining:

3d 1h 56m

Summit Industrial Products Oil/Water separator ConDePhase-15
 
Commercial & Industrial > Metal Fabrication
Current Bid: $48.00
Next Required Bid: $49.00
High Bidder: #2464
Begins Closing:
Tuesday 06/09/2020
05:43 pm CDT

Time Remaining:

3d 1h 57m

(1) section Uline 6- locker set inside dimensions 12 x 16 x 35 inches, hooks, padlock-able type handle, overall dimensions 36 x 18 x 72 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $5.00
Next Required Bid: $6.00
High Bidder: #326966
Begins Closing:
Tuesday 06/09/2020
05:43 pm CDT

Time Remaining:

3d 1h 57m

Roller conveyor unit, 15-1/2 inch rollers, adjustable height and angle, 19 x 120 inch top frame
Commercial & Industrial > Metal Fabrication
Current Bid: $850.00
Next Required Bid: $900.00
High Bidder: #334190
Begins Closing:
Tuesday 06/09/2020
05:43 pm CDT

Time Remaining:

3d 1h 57m

(6) Section of 42" x 144" Pallet Racking
Pallet Racking tear drop type to include:
(7) 42 x 144 inch uprights,
(48) 96 x 4 inch cross beams,
(38) 42 inch decking
Commercial & Industrial > Metal Fabrication
Current Bid: $260.00
Next Required Bid: $285.00
High Bidder: #75769
Begins Closing:
Tuesday 06/09/2020
05:44 pm CDT

Time Remaining:

3d 1h 58m

(1) Steel Sheet, 5/8 x 60 x 120 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $95.01
Next Required Bid: $100.01
High Bidder: #337143
Begins Closing:
Tuesday 06/09/2020
05:44 pm CDT

Time Remaining:

3d 1h 58m

Craftsman 5-drawer tool box, ball bearing, lid, key, 26 x 16  x 20 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $130.00
Next Required Bid: $135.00
High Bidder: #2464
Begins Closing:
Tuesday 06/09/2020
05:44 pm CDT

Time Remaining:

3d 1h 58m

Great Lakes 19U NEMA 12 Wall Mount Computer Cabinet (GL360N12)
New Retail $1951.00
Dimension: 36H x 24W x 24D inches
Rack Units: 19U
Weight Capacity: 250 lbs.
Features:
*MADE FOR HARSH INDOOR ENVIRONMENTS
Independently tested and certified to meet the National Electrical Manufacturers Association's Type 12 Standard
Intended for indoor use to provide a degree of protection against dust, falling dirt, water, and non-corrosive liquids
19 inch EIA 310-D Compliant
No. 12-24 threaded mounting rails, 12 ga.
Reversible mounting for left-hand or right-hand opening
Keyed locks with dust covers
Bulb gasket creates a positive environmental seal for indoor use to protect against ingress of solid foreign objects
Front and rear sections lock independently
Provisions for cable access for 1, 2, 3 inch conduit sizes
14 ga. main body in rear section
16 ga. Door
Standards: UL508A, NEMA 250 Type 12, RoHS II
 
Commercial & Industrial > Metal Fabrication
Current Bid: $90.00
Next Required Bid: $95.00
High Bidder: #334190
Begins Closing:
Tuesday 06/09/2020
05:45 pm CDT

Time Remaining:

3d 1h 59m

Wood top workbench, 60 x 30 inches
Commercial & Industrial > Metal Fabrication
Current Bid: $5.00
Next Required Bid: $6.00
High Bidder: #75559
Begins Closing:
Tuesday 06/09/2020
05:45 pm CDT

Time Remaining:

3d 1h 59m

Custom built Clamping Assembly System, pneumatic operation, Steel Work Benches to include (2) 30 x 30 inches with pneumatic height lifters, (1) 32 x 36 inches with pneumatic height lifters, (1) steel bench 23-1/2 x 29-1/2 x 1/4 x 32-1/2 height
Commercial & Industrial > Metal Fabrication
Current Bid: $26.00
Next Required Bid: $27.00
High Bidder: #251725
Begins Closing:
Tuesday 06/09/2020
05:45 pm CDT

Time Remaining:

3d 1h 59m

Polypac Systems Center hydraulic pump unit, ID no. 9211844, 20 gallon capacity, Baldor motor, 3hp, 208-230/460v, 3-phase
Commercial & Industrial > Metal Fabrication
Current Bid: $31.00
Next Required Bid: $32.00
High Bidder: #334190
Begins Closing:
Tuesday 06/09/2020
05:46 pm CDT

Time Remaining:

3d 2h 0m

Retractable pneumatic hose reel
A nonnegotiable $30 fee will be added to your invoice for removal. This item will be on the ground at the time you come to pick it up.
Commercial & Industrial > Metal Fabrication
Current Bid: $51.00
Next Required Bid: $52.00
High Bidder: #290892
Begins Closing:
Tuesday 06/09/2020
05:46 pm CDT

Time Remaining:

3d 2h 0m

(2) Enerpac hydraulic foot activated pumps, model no. PA133
Commercial & Industrial > Metal Fabrication
Current Bid: $51.00
Next Required Bid: $52.00
High Bidder: #334190
Begins Closing:
Tuesday 06/09/2020
05:46 pm CDT

Time Remaining:

3d 2h 0m

Retractable pneumatic hose reel
A nonnegotiable $30 fee will be added to your invoice for removal. This item will be on the ground at the time you come to pick it up.
Commercial & Industrial > Metal Fabrication
Showing 1 to 50 of 386 items


Auction Details:

Manufacturing Plant Relocation Auction

Manufacturing Plant Relocation Auction

Inspection:

Sat, Jun 06, 2020
09:00 am - 02:00 pm
Mon, Jun 08, 2020
12:00 pm - 06:00 pm

Auction Closing:

Tue, Jun 09, 2020
05:20 pm

Removal:

Thu, Jun 11, 2020
08:00 am - 05:00 pm
Fri, Jun 12, 2020
08:00 am - 05:00 pm
Sat, Jun 13, 2020
08:00 am - 03:00 pm

Removals are by appointment within the schedule above.

Bidding Increments:

Bid Range Minimum Increment
$0.01 - $75.00$1.00
$75.01 - $150.00$5.00
$150.01 - $250.00$10.00
$250.01 - $500.00$25.00
$500.01 - $1,000.00$50.00
$1,000.01 - $5,000.00$75.00
$5,000.01 - $50,000.00$100.00
$50,000.01 - $75,000.00$250.00
$75,000.01 - $100,000.00$500.00
$100,000.01 - $2,500,000.00$1,000.00

Discounted Buyer's PremiumRegular Buyer's Premium
15.00% 18.00%


This auction is contracted and managed by: Fram Fram

Manager: Russ Hilk


This auction is contracted and managed by Fram Fram, LLC.  

By placing a bid on this auction you are agreeing to the auction specific terms listed below in addition to K-BID user terms.  For auctions contracted and managed by an Independent Affiliate, K-BID Online, Inc. is acting as a venue only and will not be involved in any disputes or issues regarding this auction.

Everything is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.

There is a 15% BUYERS PREMIUM (15% BP) for ALL items on this auction. 18% if paying by credit card

Applicable Minnesota Sales Tax will be collected.

At the close of the auction active items will remain open until no bids have been received for three minutes.

IMPORTANT NOTE: If the high bidder of an item does NOT acknowledge the purchase, K-BID systems reserves the right to determine how and to whom it will be resold. If we determine that the winning bid was not a bona fide bidder, the item WILL NOT AUTOMATICALLY go to the next second-highest bid.


This auction is contracted and managed by an independent affiliate. By placing a bid on this auction, you are agreeing to the auction specific terms listed on this page in additions to the K-BID user terms and agreements.  

K-BID Online, Inc. (K-BID) is responsible for maintaining the K-BID.com website.  K-BID.com serves as the venue used by independent auction companies (Affiliates) to present their online auctions to bidders.  

K-BID’s role in the auctions listed on K-BID.com is limited to providing the venue for affiliate auctions. Affiliates are not employees, agents, representatives or partners of K-BID Online, Inc. K-BID’s knowledge about individual auctions and individual auction transactions is limited to the information appearing on the website.

By placing a bid on K-BID.com, bidders are verifying they are at least 18 years old and acknowledging they understand and will comply with both the K-BID.com website terms and the auction specific terms. Bidders MUST NOT share their password or account information with anyone. Bidders are responsible for bids placed on their account.

Inspection dates/times are available for every auction. Bidders are strongly encouraged to inspect prior to placing bids. Removal day is not inspection day. When an auction ends, and the winning bidder invoice appears on the bidder’s dashboard, the bidder is obligated to honor their bid(s).

Every auction item is sold “as is, where is” with no guarantees or warranties. You are responsible for inspecting items prior to purchase.

Bidders are responsible for knowing and complying with auction terms. Failure to comply with removal terms may result in bidding privileges being disabled.  Once a bid is placed it cannot be retracted.

Sellers and their agents are prohibited from bidding on their own assets.

Items with a reserve will not be sold unless the reserve price has been met.

At the close of the auction, active items will remain open until no bids have been received for three minutes.

Applicable sales tax will be collected by the affiliate managing the auction.  

In the event that bidding rights are terminated due to no-show invoices, bidders MAY be reinstated at the discretion of K-BID only after a penalty fee of 20% of the unpaid invoice(s) and a reinstatement fee of $25.00 has been paid to K-BID and a scanned copy of your driver's license emailed to us. INVOICED ITEMS WILL NOT BE AWARDED. The payment is punitive and meant to deter no-shows. Duplicate bidder accounts will be deactivated when they are determined to exist. If possible and at our discretion, K-BID reserves the right to delete any bid we believe has been placed by a suspect bidder. Any registration that shows up on our fraud detection system may be placed on hold and bids removed until the user is verified. K-BID Online, Inc reserves the right to disallow anybody from bidding on its website. Cases of obvious bidding with no intent to redeem will be referred to appropriate legal authorities.

Affiliates may lower a lot reserve at any time before or after an auction closes.  If the reserve is lowered while the auction is in progress, the applicable reserve message will appear below the Next Required Bid information (Reserve Not Met or Reserve Has Been Met); the asset will sell to the high bidder if the lowered reserve amount is met. If the reserve is lowered after the auction closes, the highest bidder at auction close will receive a winning bidder invoice. 

Once an auction begins its closing process, outbid notifications will not be sent.

Once a bid is placed it cannot be retracted.

 



21730 Hanover Ave
Lakeville
MN, 55044


Phone: 612-564-3726

We offer shipping options for almost every item large or small. If you require shipping please send an email with your Bidder Number to info@framfram.com.  Once we have an actual shipping total we will email you payment instructions. Small items can be sent FedEx. For LTL, Pallets or Machinery we can ship with a company called uShip or a carrier of your choice.  There will be a $50 charge for most items that require a pallet. Machinery can be loaded for the loading fee listed with each machine.