Everything still works and you can bid, however bids placed by others and timers will not refresh automatically. You you will need to refresh the page to see those changes!
Auction Location: 340 Railroad Street, Hamburg, MN 55339
Phone: 507-381-9927Lot Categories: Power Tools/Shop Equipment (119)
10/15/2020 07:10 pm
Smiths AW1 AC309 PK torch with 30 foot gas hose, gauges, tanks and storage / carrying case. Used, tested and works as should, very nice condition.
This paint sprayer turbine compressor claims to produce low psi with high cfm. Psi as low as 3, 4, & 5 are claimed to be achievable. I am not a painter but retailing new at $1400 plus I assume it is worth having for professional results. This one is used, tested and works as it should. Includes 30 foot 1 inch somewhat flexible hose. A must have for any serious painter.
This Honda was a one owner since new. Recently upgraded to hot water washer. 4 years old and been well maintained. Starts every time/ Very portable unit and the psi rating is 2800 t0 3000. Not only tested but I just used it a few days ago, works perfectly.
Astroline hydraulic 4 ton hydraulic hand lever jack with various attachments as you can see in the pictures. Untested.
Paslode Model # S200-W16. Uses 15/16 inch wide staples ranging from 3/4 inch to 2 inch in length. Includes Approximately 4000 1 1/4 inch length galvanized staples. Works as it should.
As the title says its a Mr Heater variable temperature from 30k to 60k btu output. includes 10 foot hose and regulator. Been used 5 times and works as it should.
Assortment of clean C Clamps Sizes range from 1 1/2 up to 6 inches.
Lot contains 2 sliding 6 inch, 2 misc adjustable and 4 vise clamps
This Graco paint sprayer is a high quality tool and with the Dewalt powered 20v Max Lithim Ion battery it is a very versatile sprayer. Comes with one battery and a charger. Used, Not tested The model number is 17N164.
Michelin's 3 1/2 ton hydraulic jack lifting range 5-1/2 inches to 22 inches, 7000 pound lifting capacity. The handle shown is not the original. This jack is heavy!
This feed/corn grinder was manufactured in the early 1900's by a company called Deere & Webber. Later this company became what we know today as John Deere. This is in relatively good shape for one this old and could be a great refurbish project. The gears are frozen probably rust. The grinder is powered by a large belt that was run off the clutch drum of older tractors of that era. Would be nice to see someone refurbish and demonstrate the antique at community events in the future.
Lot consists of (10) 8 foot pallet racking beams. These beams are the teardrop style, heavy duty and they are straight.
This lot has four sections which can be hooked together or set up as individual pieces. The shelving has a variety of different applications and sizes of compartments. There is the main unit that is 72 inches long 48 high and 12 deep. There is also a home made shelf that can sit on top of this section as you can see in the pictures that is also the same length, width, and depth as the main unit. The other 2 sections are 42 x 48 x 12 and 54 x 48 x 12. They are all in great shape regarding paint, no rust, and are heavy gauge construction.
This saw draws 13 amp and runs on standard 120 volt power. The cabinet works as a sawdust collection box, although it is missing the drawer that looks like should be in front to catch the dust. It has a 5/8 inch arbor and 5000 rpm. Tested on a job and works as it should.
Army issued combination metric wrench set
This is definitely a huge wheelbarrow. Boasting 8 cubic feet of capacity with double front wheels makes hauling a large load easy. Very clean, appears to have had little use.
By National Vendors out of St Louis, Mo. It has been plugged in and when so did start as it should . Check the serial number on the picture to find out more about this item.
Variety of 10 inch saw blades for a table saw ranging from 24 teeth to 200 teeth for al kinds of cutting options. All appear to be sharp and 3 of the five appear new but have rust spots on from sitting around.
This wrench has a range of 20 to 150 foot lbs of torque range. ATD Tools are very good quality tools, like new condition.
The yellow one is from bulldog power products by Werner, The orange on has no visible markings to tell the brand. One thing for sure is that they both work as should and the telescoping stands also work as should, tested.
Includes drill model 693SFD, drill model 6337PY, a light and battery. Does not have charger; not tested.
This is a Klutch medium air hammer which is rated at 90 psi, part # 100771 and has a 1/2 inch coupler. Used, tested, works as it should.
Ready heaters 35,000 btu propane fueled heater model number RLP 35. Tested and work as it should
Craftsman 1/2 inch torque wrench up to 150 foot pounds and 200 newton meters. Like new condition
Lot consists of one igloo big white cooler. As the pictures show, there is only one latch that snaps shut and the back 3 hinges are broken. The lid fits snuggly and the missing hinges do not effect the performance of this long time dependable cooler. It is very clean.
Model T0060 range from 0 to 250 inch lbs. New in the case.
Set of 3 grease guns, sizes consist of a 12 inch, a 6 inch and a 4 inch hand operated grease guns.
Lot consists of 3 hand pumped grease guns.
One 12 inch, one 6 inch, and one 4 inch.
Lot contains a 14 gallon storage tank for gas or fuel and has a gravity flow hose and nozzle. The thing works great and doesn't appear to be used much if at all. Take it in your truck, trailer or leave it in your shop for extra fuel storage.
This lot consists of 3 extension cords. The orange one is 12 gauge and 100 feet, the smaller orange one i 14 gauge and 25 feet, and the yellow one is flat type cord that appears to be 14 gauge and is also 25 feet
Lot consist of 3 extension cords all of which appear to be 14 gauge. The brown one is 42 feet, yellow one is 100 feet, and the orange one is 25 feet.
Three pair of upgear roof support brackets for fall protection. All 3 pair are new in package. Manufactured by Werner.
Jack 1 is a GM performance parts GM 7028 with 2 1/2 ton capacity & Jack 2 is a Pro Lift 2 ton capacity floor jack. One handle included and fits both Jacks
Brand new in the case tool shop 1/2 torque wrench.
Model M22 this ladder is heavy duty giant. step ladder height 9 feet and extension ladder height is 22 feet. Very excellent condition.
Model Number 919.185430. 20 gallon oil lubricated , max psi 125. Tested and works as it should.
No Image Available
Due to the type of items in this action, Second Storys will not be offering shipping service to winning bidders on this auction.
This tool works as it should. The brand is not readily visible but can see model 45AB and a serial number of 030846.
Telescoping tree trimming pole from Yardworks. Extends to 18 feet. Like new used twice.
This scaffolding is great for working in most any place small or large and is easily set up and taken done in minutes. It has 4 locking casters and moves easily when they are not locked. Adjustable platform for your desired heights.
I believe this system has everything except the jacks themselves. There are 3 - 6 foot fall protection aluminum skid resistant square poles, three connector square poles and 5 stabilizer attachment points. These could make a great addition to a pump jack system that is in place or stand alone if the jack portions where purchased. Very safety orientated system.
These two hoses are light weight and are the 3/8 version and are both 50 feet long with quick connects on all ends.
This hose is strong, made out of rubber and the size is 3/8. Nice condition.
Lot contains a roof rake, 2 snow shovels, 2 spades and a leaf rake
Lot contains a row digger, edger, and a potato digger
Lot contains 2 roof rakes, 1 leaf rake, 1 snow shovel, 1 soft floor leveler, and 1 potato fork
Lot contains 2 steel sawhorses and a yellow mini scaffold rolling cart.
Lot contains carrying bucket, inde w200 torch, 12 feet of double hoses, 2 sets of gauges, one oxygen tank and one acetylene tank. Gauges are not assembled onto tanks.
Lot contains 2 gas tanks for welding, one Goss Torch for brazing, one set of dual gauges and a Bernz-o-matic bottle and brazing torch attached to the bottle
This auction contains items that are not cost effective for shipping. Most lots are heavy and bulky. NO SHIPPING FOR THIS AUCTION. Auction contains acetylene welding setups (3), top tier paint spraying equipment (5) antique Letz corn grinder from early 1900,s(1), very nice pressure washer (1), shelving and pallet racking beams, specialty tools and more everyday tools. Winning bidders must have invoice paid by end of removal day, only then will alternate pickup days be considered if you have an emergency on pickup day.
NO SHIPPING OFFERED ON THIS AUCTION, ITEM ARE TOO HEAVY AND BULKY.
All winnings bidders are required to have auction invoice paid by 7:00 PM on October 19, 2020, end of pickup day and time. If not picked up on removal day, arrangements for alternative day and time need to be made prior to closing of removal day, or your item may be forfeited.
A few items are extremely heavy, forklift on site but please bring help to load if your item is a heavy larger item.
|Bid Range||Minimum Increment|
|Hammer Price Tier||Buyer's Premium||Cap|
|$0.00 - $4,999.99||13.00%|
|$5,000.00 - infinity||10.00%||$1,000.00|
This auction is contracted and managed by: Second Story's LLC
Manager: Kevin Subart
Payments accepted: Credit cards & cash, no checks at this time.
Items must be paid for and picked up on removal day unless other arrangements are made prior to pick up day. Please bring help to help load larger lots/items.
Deviation from pick up day only in case of a personal emergency. If for some reason you can not make it on removal day, you must contact us prior to end of removal day and have the auction invoice paid for by end of removal day, then we will work something out with you for pickup within 5 days.
If you have questions on any of the items on the auction, please contact Kevin at 507-381-9927.
Second Story's LLC reserves the right to charge a $25 late pickup fee per item for bidders who are unable to attend the stated removal dates.
By participating in this auction, you release Second Story's LLC of any liability of damage or injury that may occur on the premises of this auction.
340 Railroad Street
P.O. Box 184
Note: There is no shipping offered for this auction. The items are too large and bulky and heavy. In lieu of shipping service, as long as auction invoice is paid by end of removal day, we will work out an alternative date with you to pick up your items.